Vista VPC9130/CM 11a Supply Voltage Terminals, Video Iris Lens Connector, Camera Mounting

Page 7

Installation Instructions

Series 3 Cameras

 

 

CONTROLS AND SWITCHES

iris level. The potentiometer is factory set to give a 1V pk-pk video output for a typical scene. The level should not be adjusted unless absolutely necessary.

(11a) Supply Voltage Terminals

This terminal accepts 11-40 VDC or 14-30 VAC at 50Hz (CCIR/PAL) or 60Hz (EIA/NTSC) power source. The terminals are the quick release type. To connect a cable press the appropriate release lever and insert the end of cable fully home. Ensure that there is a sufficient length of bare tinned wire to make contact with the connector. Also ensure that the cable insulation is not too thick, preventing the cable from being properly inserted.

Only connect the camera to a class 2 power supply. (11b) Supply Voltage Power Cord

The non-detachable power supply cord must be connected to a power supply of 98 to 260 VAC at 50Hz (CCIR/PAL); or 110 VAC ±10% at 60Hz (EIA/NTSC). CAMERAS MUST BE CONNECTED TO A PROTECTIVE EARTH GROUND.

(12) Video Iris Lens Connector

This three way connector provides the power and video drive signal for use with video drive Auto Iris lenses. The terminal block that mates with this connector is provided in the packing kit. Connect the lens to the terminal block in accordance with the diagram below:

++ = Lens positive supply

= Lens ground

VV = Video drive signal

Auto Iris Lens Connections

(13) Video Output BNC Connector

To obtain a 1.0V [pk-pk] composite video signal, connect a video coaxial cable terminated with a 75 Ohm BNC connector to the BNC socket marked VIDEO OUT.

CAMERA MOUNTING

Mounting points are provided on the top and bottom of the camera and are used to mount the camera on a bracket or tripod. Only use standard, photographic 1/4” BSW (20 UNC) mounting bolts.

Page 7

Image 7
Contents Series 3 CCD Cameras Installation Instructions Introduction Electromagnetic Compatibility EMC Product SafetyMANUFACTURER’S Declaration of Conformance Mains power supply Power SupplyAuto-switching power supply Gamma Controls and SwitchesSynchronisation Selection LL/INT Backlight Compensation BLCBack Focus Adjustment screws Line Lock Phase Adjust Potentiometer7 Line Lock Phase Adjust Buttons + Advance Retard Direct Drive/DC Drive Lens ConnectorCamera Mounting Video Iris Lens ConnectorVideo Output BNC Connector 11a Supply Voltage TerminalsFocus Adjustment Lens Setup ProceduresLens Selection Auto-iris and Direct Drive Lenses DimensionsZoom Lenses Page Série 3 Caméras Instructions d’installation Tableau Compatibilite Electromagnetique Securite DU ProduitDeclaration DE Conformite DU Constructeur Alimentation à commutation automatique PrecautionsAlimentation Alimentation secteurBacklight Compensation BLC compensation de rétro-éclairage Commandes ET CommutateursElectronic Iris EI diaphragme électronique Potentiomètre de réglage de phase de verrouillage de ligneConnecteur d’objectif à diaphragme vidéo Vis de réglage de la rétro-mise au point11a Bornes de tension d’alimentation Doivent Etre Connectees a UNE Terre DE ProtectionObjectifs à diaphragme automatique Installation DE LA CameraProcedures DE Configuration D’OBJECTIF Choix D’OBJECTIFSObjectifs à diaphragme automatique et entraînement direct Reglage DE LA Mise AU PointObjectifs fixes Objectifs à diaphragme manuelPage Series Kameras Installationsanweisungen Tabelle EinleitungElektromagnetische Kompatibilität ProduktsicherheitKonformitätserklärung DES Herstellers Stromversorgung VorsichtsregelnAutomatische Wahl der Stromversorgung Synchronisationswahl LL/INT Steuerelemente UND SchalterBack Focus-Einstellschrauben Line Lock-Phasenangleich-PotentiometerUnd 7 Line Lock-Phasenangleichtasten + Advance Retard Direct Drive-/DC Drive-ObjektivanschlussVideo-Ausgang-BNC-Anschluss Electronic Iris- und DC-Objektivlevel-Potentiometer11a Stromzufuhranschlüsse Video Iris-Objektiv-AnschlussAuto Iris-Objektive KameramontageObjektivwahl OBJEKTIV-EINRICHTUNGSVERFAHRENAbmessungen FokuseinstellungPage Installatie-instructies Camera’s uit de 3-serie Tabel InleidingElektromagnetische Compatibiliteit EMC ProductveiligheidVerklaring VAN Conformiteit VAN DE Fabrikant Automatisch schakelende stroomvoorziening VoorzorgsmaatregelenStroomvoorziening HoofdstroomvoorzieningSynchronisatieselectie LL/INT Besturing EN SchakelaarsTegenlichtcompensatie BLC Back focus-stelschroeven Elektronische iris EIPotentiometer voor Line Lock faseafstelling Direct Drive-/DC Drive-lensaansluitingAansluiting voor video-irislens 11a aansluiting voor stroomtoevoerBNC-aansluiting voor videosignaal Automatische irislenzen Instelprocedures Voor DE LensCamerabevestiging LensselectieAfmetingen ScherpstellingPage Telecamere della serie 3 Istruzioni di installazione Tabella IntroduzioneCompatibilità Elettromagnetica EMC Sicurezza DEL ProdottoDichiarazione DI Conformità Della Casa Costrutturice Alimentazione a commutazione automatica AttenzioneAlimentazione Alimentazione dalla rete elettricaColore Interruttori E ComandiViti di regolazione della profondità di fuoco Electronic Iris EI, obiettivo a diaframma elettronicoPotenziometro di regolazione della fase di blocco di linea Connettore per obiettivi Direct Drive/CCConnettore dell’obiettivo a diaframma 11a Morsetti della tensione di alimentazioneConnettore BNC dell’uscita video Obiettivi a diaframma automatico Procedure DI Configurazione DELL’OBIETTTIVOMontaggio Della Telecamera Selezione DELL’OBIETTIVORegolazione Della Messa a Fuoco DimensioniTelecamere della serie Istruzioni di installazione Page Norbain SD Limited
Related manuals
Manual 12 pages 15.2 Kb

VPC9132/CM, VPM8032, VPM8130, VPC9032/CM, VPM8120 specifications

The Vista VPM8132, VPM8122, VPC9032, VPM8030, and VPC9132 are a range of advanced video processing modules and control systems designed to meet the demanding needs of modern surveillance and video management. Each model incorporates cutting-edge technologies that cater to different operational requirements in various environments.

The Vista VPM8132 is renowned for its exceptional processing power, supporting high-resolution video streaming with minimal latency. This model is equipped with advanced video analytics capabilities, including motion detection and facial recognition, enhancing surveillance efficiency. Its robust encoding technology allows for seamless integration with existing security infrastructures, ensuring that users can easily adopt this model without the need for significant system overhauls.

The VPM8122 serves as a versatile solution for smaller installations that still require high-quality video processing. This model is streamlined for user-friendliness, featuring intuitive configuration options that make setup and operation straightforward. With support for multiple video formats and resolutions, the VPM8122 accommodates a variety of cameras and sensors, making it a flexible choice for diverse applications.

The VPC9032 is tailored for comprehensive video management, perfect for enterprise-level operations. It integrates seamlessly with IP networks and provides extensive storage options, enabling efficient handling of vast amounts of video data. Enhanced cybersecurity features ensure that video footage is protected against unauthorized access, making it ideal for sensitive environments.

On the other hand, the VPM8030 is built for high-performance video compression and transmission. With low-bandwidth usage, it maintains video quality over extended distances, making it suitable for remote monitoring scenarios. Its ability to adapt to varying network conditions allows for consistent performance, even in challenging environments.

Lastly, the VPC9132 is designed for flexible deployment in larger systems, supporting a multitude of input sources and incorporating advanced video distribution technologies. This model is fitted with powerful remote access capabilities, allowing operators to monitor and control video feeds from anywhere. The combination of high-definition output and sophisticated user interface makes the VPC9132 an excellent choice for high-end security applications.

Overall, the Vista series offers a powerful suite of solutions that leverage innovative technologies to enhance video surveillance and management, ensuring higher levels of security and efficiency across various settings. Each model addresses specific needs, providing users with tailored options to optimize their surveillance strategies.