Lens Selection, Lens Setup Procedures | Vista VPC9032/CM, VPM8132

Series 3 Cameras	Installation Instructions

LENS SELECTION

Suitable lens types are C and CS mount in fixed iris, manual iris, auto iris or direct drive versions. Sizes are shown below. Cameras are factory set for CS mount lenses. If using a C mount lens, rotate either of the back focus screws approximately 30 turns anticlockwise before fitting the lens.

LENS SETUP PROCEDURES

For manual or fixed iris lenses set the EI switch to ON.

Auto Iris lenses

Switch the EI off. Refer to the lens instructions and adjust the lens for the optimum picture (video output level of 1V peak-to-peak).

Direct Drive lenses

Switch the EI off. Use an appropriate screwdriver to turn the lens level potentiometer (under the hinged flap) fully clockwise then back off until the optimum picture is obtained (video output level of 1V peak-to-peak).

FOCUS ADJUSTMENT

The back focus adjustment screws are located on the top and side of the case and should be adjusted using an appropriate screwdriver. If possible, always use the top screw to adjust the back focus mechanism.

Turn the adjuster screw clockwise or anticlockwise to obtain focus. When the focus is sharp, turn the back focus adjustment screw 2 or 3 turns anticlockwise. The picture will lose sharpness. Turn the back focus screw clockwise until focus is once again obtained. If you have turned the back focus screw clockwise past the point of best focus, repeat the procedure. The last turn of the back focus adjustment screw must always be in a clockwise direction. Do not ‘over turn’ the back focus mechanism.

Fixed Lenses

Set the lens focus to infinity and view an image greater than two metres away. Focus the image using the back focus screw. Set the lens focus as required.

Manual Iris Lenses

Open the iris fully and set the lens focus to infinity. View an image greater than two metres away. Focus the image using the back focus screw. Set the lens focus and iris as required.

Page 8

VPC9132/CM, VPM8032, VPM8130, VPC9032/CM, VPM8120 specifications

The Vista VPM8132, VPM8122, VPC9032, VPM8030, and VPC9132 are a range of advanced video processing modules and control systems designed to meet the demanding needs of modern surveillance and video management. Each model incorporates cutting-edge technologies that cater to different operational requirements in various environments.

The Vista VPM8132 is renowned for its exceptional processing power, supporting high-resolution video streaming with minimal latency. This model is equipped with advanced video analytics capabilities, including motion detection and facial recognition, enhancing surveillance efficiency. Its robust encoding technology allows for seamless integration with existing security infrastructures, ensuring that users can easily adopt this model without the need for significant system overhauls.

The VPM8122 serves as a versatile solution for smaller installations that still require high-quality video processing. This model is streamlined for user-friendliness, featuring intuitive configuration options that make setup and operation straightforward. With support for multiple video formats and resolutions, the VPM8122 accommodates a variety of cameras and sensors, making it a flexible choice for diverse applications.

The VPC9032 is tailored for comprehensive video management, perfect for enterprise-level operations. It integrates seamlessly with IP networks and provides extensive storage options, enabling efficient handling of vast amounts of video data. Enhanced cybersecurity features ensure that video footage is protected against unauthorized access, making it ideal for sensitive environments.

On the other hand, the VPM8030 is built for high-performance video compression and transmission. With low-bandwidth usage, it maintains video quality over extended distances, making it suitable for remote monitoring scenarios. Its ability to adapt to varying network conditions allows for consistent performance, even in challenging environments.

Lastly, the VPC9132 is designed for flexible deployment in larger systems, supporting a multitude of input sources and incorporating advanced video distribution technologies. This model is fitted with powerful remote access capabilities, allowing operators to monitor and control video feeds from anywhere. The combination of high-definition output and sophisticated user interface makes the VPC9132 an excellent choice for high-end security applications.

Overall, the Vista series offers a powerful suite of solutions that leverage innovative technologies to enhance video surveillance and management, ensuring higher levels of security and efficiency across various settings. Each model addresses specific needs, providing users with tailored options to optimize their surveillance strategies.