Sanyo VCC-6974 instruction manual Iris setting, AI Auto Iris mode setting, Lens Type setting

Page 23

USING THE MENU SCREEN

AI/BLC•LENS TYPE

IRIS setting

The following two types of iris level adjustment can be carried out.

AAI (Auto-Iris):This automatically adjusts the camera iris so that the optimum image can be obtained when an auto-iris lens is being used.

BEI (Electronic Iris): This method can be used for both a manual iris or fixed iris lens. It automatically adjusts the camera’s shutter speed so that an optimum image can be obtained. (Refer to page 27.)

AAI (Auto Iris) mode setting

1 Press the SET button for about 3 seconds. The MAIN MENU screen will be displayed.

2Press the CURSOR (l, then d or c) button to change the

IRIS setting to “AI” (the setting will flash), then press the SET button.

The ADJUSTMENT FOR AI screen will be displayed.

LENS TYPE setting

The LENS TYPE setting will automatically change to the mode (DC or VIDEO) which has been set using the auto-iris lens switch on the side of the camera.

SET	CURSOR	MAIN MENU
		LANGUAGE	SET	p
		CAMERA ID	OFF
		SYNC	INT
		IRIS	AI	p
		ADJUSTMENT FOR AI
		LENS TYPE	DC
		BLC	OFF
		SENSE UP	OFF

22 English

Image 23

Contents Propos de ce manuel About this manualFeatures ContentsPour la clientèle canadienne Information to UserFor the customers in Canada Precautions Parts Names Power indicator PowerVideo output connector Video OUT BNC type Alarm output terminal ALARM, C, aCursor button Cursor Camera setup section under the coverLens iris output connector Lens Menu setting button SETLens mount cap Video type auto-iris lens If using a Video type auto-iris lensConcerning AUTO-IRIS Lenses DC type auto-iris lensMount type lens Mounting the LensRemove the lens mount cap from the camera Flange-back adjustment Rewiring the lens cable in the lens iris plugCoaxial cable type and maximum length ConnectionsBasic connection for monitoring or recording Connection to a multiplexer RS-485 terminal connectionsConnection to a VCR Preset will return to the zoom pan, tilt center position About the Alarm output terminalRemote controller circuit connections Switching to the Main Menu screen Using the Menu ScreenUsing the Cursor button Switching to sub-menu screensUsing the Menu Screen Then press the SET button Language settingChanging the camera ID to a new ID Camera ID settingExample To set the camera ID to BN1 Determining the start position for character inputDisplay will return to the Camera ID Setting screen External sync VBS Sync settingsInternal synchronization INT Power supply synchronization setting L L External sync setting VBS Menu Back END Lens Type setting Iris settingAI Auto Iris mode setting BLC setting Adjust the Iris Level setting DC type lens onlyAI/BLCMULTI BLC Window Weighting screen will be displayed BLC/EVAL 5-section photometry mode settingReturning the values to the default settings WeightingPress the Cursor l, then d or c button until EI Sense UP settingEI Electronic Iris mode setting Manual white balance MWB White Balance settingAutomatic color temperature tracking setting ATW White BALANCE/ATWMASKING Masking settingMenu Back END Press and hold the SET button Push-lock white balance adjustment AWCManual white balance setting MWB Long exposure mode Long Electronic Shutter settingShort mode Short For Short mode When Motion is set to ON, Long mode cannot be selected For Long modeExample Motion settingIris Sense UP mode has been set. Refer to Alarm interval setting function Interval Size setting function SizeMask area setting function Masking Sensitivity setting function SensitivityÜü, íí, óó, ññ Direction settingV vertical value is flashing, then press the Cursor c button Size settingMotion Size display table Returning to the default setting MOTION/MASKING Menu Back END Maximum Sensitivity settingThis sets the movement amplitude of subjects on the screen MOTION/ZOOM, Interval Zoom settingAlarm Sign setting Interval settingChecking the detected movements set by the Motion item Image is zoomed in when a movement is detectedCamera ID flashes on-screen when a movement is detected Active Move Differ Option settings Aperture setting Gamma setting AGC settingPanning For FIX modeOPTION/FIXI Tilt Returning to the default settingsZooming For VAR modeOPTION/VAR ZOOM, Tilt RS-485 setting Mirror settingAbout SW No Address settingTerminate setting SET button Initial settingOperations using the camera Menu screens Operations Using the System ControllerIris level operations Operations using the camera command Camera buttonElectronic zoom White balance and AWC-LOCK settings Setting the Sense UP and electronic shutterBacklight correction settings 4321 Menu DisplayMenu Display Picture is not clear TroubleshootingNo picture on the monitor screen Camera SpecificationsDimensions mm AccessoriesExclusions