Sanyo VCC-6974 instruction manual Mirror setting, RS-485 setting

Page 57

USING THE MENU SCREEN

OPTION/MIRROR, RS-485

EMIRROR setting

1 Press the CURSOR (l, then d or c) button to change the MIRROR setting to “H” (the setting will flash).

The image will be inverted horizontally. The image will change as described below each time the CURSOR button is pressed.

•	OFF: Normal image	•	V: Inverted vertically
•	H: Inverted horizontally	•	HV: Inverted horizontally and vertically

2When finished:

Press the CURSOR (l) button to select BACK (it will flash) at the bottom of the	OFF
screen. Then press the CURSOR (d or c) button to change BACK to END, and

press the SET button.

☞To return to the previous screen, select BACK then press the SET button.

FRS-485 setting

1 Press the CURSOR (l) button to select the RS-485 setting “SET” (the setting will flash), then press the SET button. The MENU FOR RS-485 screen will be displayed.

2Press the CURSOR (l) button so that the BAUD RATE value is flashing, then press the CURSOR (d or c) button to change the communication speed.

Note: The BAUD RATE setting should be compatible with the transmission speed of the peripheral devices.

3Press the CURSOR (l, then d or c) button to change the ALARM setting to ON (the setting will flash), then set the alarm transmission.

ON: Alarm signals are sent to the controller

OFF: Alarm signals are not sent to the controller

CURSOR	OPTION MENU
	APERTURE	ON	p
	AGC	ON
	GAMMA	ON
	ZOOM	OFF
	MIRROR	H

		H	V		HV
	CURSOR	SET
		SET
			MENU	BACK
			MENU	END
	CURSOR		OPTION MENU
	CURSOR	SET	APERTURE	ON	p
		SET

			AGC	ON
			GAMMA	ON
			ZOOM	OFF
			MIRROR	OFF
			RS-485	SET	p
	CURSOR	SET	MENU FOR RS-485
	CURSOR

			BAUD RATE	19200
			ALARM	ON

OFF

19200➞9600➞4800➞2400

56 English

Image 57

Contents Propos de ce manuel About this manualFeatures ContentsInformation to User For the customers in CanadaPour la clientèle canadienne Precautions Video output connector Video OUT BNC type Power indicator PowerAlarm output terminal ALARM, C, a Parts NamesLens iris output connector Lens Camera setup section under the coverMenu setting button SET Cursor button CursorLens mount cap Concerning AUTO-IRIS Lenses If using a Video type auto-iris lensDC type auto-iris lens Video type auto-iris lensMounting the Lens Remove the lens mount cap from the cameraMount type lens Flange-back adjustment Rewiring the lens cable in the lens iris plugConnections Basic connection for monitoring or recordingCoaxial cable type and maximum length RS-485 terminal connections Connection to a VCRConnection to a multiplexer About the Alarm output terminal Remote controller circuit connectionsPreset will return to the zoom pan, tilt center position Using the Cursor button Using the Menu ScreenSwitching to sub-menu screens Switching to the Main Menu screenUsing the Menu Screen Then press the SET button Language settingExample To set the camera ID to BN1 Camera ID settingDetermining the start position for character input Changing the camera ID to a new IDDisplay will return to the Camera ID Setting screen Sync settings Internal synchronization INTExternal sync VBS Power supply synchronization setting L L External sync setting VBS Menu Back END Iris setting AI Auto Iris mode settingLens Type setting BLC setting Adjust the Iris Level setting DC type lens onlyAI/BLCMULTI BLC Window Weighting screen will be displayed BLC/EVAL 5-section photometry mode settingReturning the values to the default settings WeightingSense UP setting EI Electronic Iris mode settingPress the Cursor l, then d or c button until EI White Balance setting Automatic color temperature tracking setting ATWManual white balance MWB White BALANCE/ATWMASKING Masking settingMenu Back END Press and hold the SET button Push-lock white balance adjustment AWCManual white balance setting MWB Electronic Shutter setting Short mode ShortLong exposure mode Long For Short mode When Motion is set to ON, Long mode cannot be selected For Long modeMotion setting Iris Sense UP mode has been set. Refer toExample Mask area setting function Masking Size setting function SizeSensitivity setting function Sensitivity Alarm interval setting function IntervalÜü, íí, óó, ññ Direction settingV vertical value is flashing, then press the Cursor c button Size settingMotion Size display table Returning to the default setting MOTION/MASKING Menu Back END Sensitivity setting This sets the movement amplitude of subjects on the screenMaximum MOTION/ZOOM, Interval Zoom settingAlarm Sign setting Interval settingImage is zoomed in when a movement is detected Camera ID flashes on-screen when a movement is detectedChecking the detected movements set by the Motion item Active Move Differ Option settings Aperture setting Gamma setting AGC settingPanning For FIX mode OPTION/FIXI Tilt Returning to the default settingsZooming For VAR modeOPTION/VAR ZOOM, Tilt RS-485 setting Mirror settingAddress setting Terminate settingAbout SW No SET button Initial settingOperations using the camera Menu screens Operations Using the System ControllerOperations using the camera command Camera button Electronic zoomIris level operations Setting the Sense UP and electronic shutter Backlight correction settingsWhite balance and AWC-LOCK settings 4321 Menu DisplayMenu Display Troubleshooting No picture on the monitor screenPicture is not clear Camera SpecificationsDimensions mm AccessoriesExclusions