Sanyo VCC-6974 Setting the Sense UP and electronic shutter, Backlight correction settings

Page 62

OPERATIONS USING THE SYSTEM CONTROLLER

C: Setting the SENSE UP and electronic shutter

1)If the SHUTTER setting in the camera’s main menu is set to LONG or SHORT, you can change the SHUTTER SPEED setting.

•Press the ELS button, then press the “+” button to turn on the electronic shutter.

•Press the ELS button, then press the “–” button to turn off the electronic shutter.

2)If the SHUTTER setting in the camera’s main menu is set to OFF, you can change the SENSE UP setting.

•Press the ELS button, then press the “+” button to turn on the SENSE UP setting.

•Press the ELS button, then press the “–” button to turn off the SENSE UP setting.

Note:

•If the SENSE UP zoom ratio setting has not been changed, then the zoom ratio will be set to the factory default setting, which is X8.

•If the MOTION setting is at ON, the electronic sensitivity (SENSE UP) will not operate.

•If the SHUTTER item SHORT and LONG settings default values have not been changed, the SHORT setting will be 1/100S and the LONG setting will be X8.

D: Backlight correction settings

1)Turning backlight correction on

Press the BLC button then press the “+” button.

2)Turning backlight correction off

Press the BLC button then press the “–” button.

If the BLC setting has not been changed, then the mode will be set to EVAL mode when the backlight correction is turned on.

E: White balance and AWC-LOCK settings

1)White balance lock

Press the AWC SET button.

2)Returning to the white balance mode previously active Press the AWC RESET button.

English 61

Image 62

Contents About this manual Propos de ce manuelContents FeaturesPour la clientèle canadienne Information to UserFor the customers in Canada Precautions Alarm output terminal ALARM, C, a Power indicator PowerVideo output connector Video OUT BNC type Parts NamesMenu setting button SET Camera setup section under the coverLens iris output connector Lens Cursor button CursorLens mount cap DC type auto-iris lens If using a Video type auto-iris lensConcerning AUTO-IRIS Lenses Video type auto-iris lensMount type lens Mounting the LensRemove the lens mount cap from the camera Rewiring the lens cable in the lens iris plug Flange-back adjustmentCoaxial cable type and maximum length ConnectionsBasic connection for monitoring or recording Connection to a multiplexer RS-485 terminal connectionsConnection to a VCR Preset will return to the zoom pan, tilt center position About the Alarm output terminalRemote controller circuit connections Switching to sub-menu screens Using the Menu ScreenUsing the Cursor button Switching to the Main Menu screenUsing the Menu Screen Language setting Then press the SET buttonDetermining the start position for character input Camera ID settingExample To set the camera ID to BN1 Changing the camera ID to a new IDDisplay will return to the Camera ID Setting screen External sync VBS Sync settingsInternal synchronization INT Power supply synchronization setting L L External sync setting VBS Menu Back END Lens Type setting Iris settingAI Auto Iris mode setting Adjust the Iris Level setting DC type lens only BLC settingAI/BLCMULTI BLC/EVAL 5-section photometry mode setting BLC Window Weighting screen will be displayedWeighting Returning the values to the default settingsPress the Cursor l, then d or c button until EI Sense UP settingEI Electronic Iris mode setting Manual white balance MWB White Balance settingAutomatic color temperature tracking setting ATW Masking setting White BALANCE/ATWMASKINGMenu Back END Push-lock white balance adjustment AWC Press and hold the SET buttonManual white balance setting MWB Long exposure mode Long Electronic Shutter settingShort mode Short For Short mode For Long mode When Motion is set to ON, Long mode cannot be selectedExample Motion settingIris Sense UP mode has been set. Refer to Sensitivity setting function Sensitivity Size setting function SizeMask area setting function Masking Alarm interval setting function IntervalDirection setting Üü, íí, óó, ññSize setting V vertical value is flashing, then press the Cursor c buttonMotion Size display table Returning to the default setting MOTION/MASKING Menu Back END Maximum Sensitivity settingThis sets the movement amplitude of subjects on the screen Zoom setting MOTION/ZOOM, IntervalInterval setting Alarm Sign settingChecking the detected movements set by the Motion item Image is zoomed in when a movement is detectedCamera ID flashes on-screen when a movement is detected Active Move Differ Option settings Aperture setting AGC setting Gamma settingFor FIX mode PanningReturning to the default settings OPTION/FIXI TiltFor VAR mode ZoomingOPTION/VAR ZOOM, Tilt Mirror setting RS-485 settingAbout SW No Address settingTerminate setting Initial setting SET buttonOperations Using the System Controller Operations using the camera Menu screensIris level operations Operations using the camera command Camera buttonElectronic zoom White balance and AWC-LOCK settings Setting the Sense UP and electronic shutterBacklight correction settings Menu Display 4321Menu Display Picture is not clear TroubleshootingNo picture on the monitor screen Specifications CameraAccessories Dimensions mmExclusions