Sanyo VCC-6974 White Balance setting, Automatic color temperature tracking setting ATW

Page 29

USING THE MENU SCREEN

WHITE BALANCE/ATW

WHITE BALANCE setting

The following three types of white balance adjustment can be carried out.

AAutomatic color temperature tracking (ATW: Auto Trace White balance)

This makes adjustments automatically so that the same colors can be obtained even if the illumination level changes.

BPush-lock white balance (AWC: Auto White balance Control)

One-push automatic white balance setting is possible. This is used mainly when the ATW setting does not reproduce faithful colors. Refer to page 31.

CManual white balance (MWB)

This lets you make fine adjustments to the color as desired. It can be used when the optimum color reproduction cannot be obtained by using ATW. Refer to page 32.

AAutomatic color temperature tracking setting (ATW)

1 Press the SET button for about 3 seconds. The MAIN MENU screen will be displayed.

2Press the CURSOR (l, then d or c) button to change the

WHITE BALANCE setting to “ATW” (the setting will flash).

3When finished:

Press the CURSOR (l) button to select BACK (it will flash) at the bottom of the screen. Then press the CURSOR (d or c) button to change BACK to END, and press the SET button.

To return to the previous screen, select BACK then press the SET button.

SET

 

MAIN MENU

 

 

 

LANGUAGE

SET

p

 

CAMERA ID

OFF

 

 

SYNC

INT

 

CURSOR

IRIS

AI

p

WHITE BALANCE

ATW

p

CURSOR SET

MENU

BACK

MENU

END

28 English

Image 29
Contents Propos de ce manuel About this manualFeatures ContentsPour la clientèle canadienne Information to UserFor the customers in Canada Precautions Video output connector Video OUT BNC type Power indicator PowerAlarm output terminal ALARM, C, a Parts NamesLens iris output connector Lens Camera setup section under the coverMenu setting button SET Cursor button CursorLens mount cap Concerning AUTO-IRIS Lenses If using a Video type auto-iris lensDC type auto-iris lens Video type auto-iris lensMount type lens Mounting the LensRemove the lens mount cap from the camera Flange-back adjustment Rewiring the lens cable in the lens iris plugCoaxial cable type and maximum length ConnectionsBasic connection for monitoring or recording Connection to a multiplexer RS-485 terminal connectionsConnection to a VCR Preset will return to the zoom pan, tilt center position About the Alarm output terminalRemote controller circuit connections Using the Cursor button Using the Menu ScreenSwitching to sub-menu screens Switching to the Main Menu screenUsing the Menu Screen Then press the SET button Language settingExample To set the camera ID to BN1 Camera ID settingDetermining the start position for character input Changing the camera ID to a new IDDisplay will return to the Camera ID Setting screen External sync VBS Sync settingsInternal synchronization INT Power supply synchronization setting L L External sync setting VBS Menu Back END Lens Type setting Iris settingAI Auto Iris mode setting BLC setting Adjust the Iris Level setting DC type lens onlyAI/BLCMULTI BLC Window Weighting screen will be displayed BLC/EVAL 5-section photometry mode settingReturning the values to the default settings WeightingPress the Cursor l, then d or c button until EI Sense UP settingEI Electronic Iris mode setting Manual white balance MWB White Balance settingAutomatic color temperature tracking setting ATW White BALANCE/ATWMASKING Masking settingMenu Back END Press and hold the SET button Push-lock white balance adjustment AWCManual white balance setting MWB Long exposure mode Long Electronic Shutter settingShort mode Short For Short mode When Motion is set to ON, Long mode cannot be selected For Long modeExample Motion settingIris Sense UP mode has been set. Refer to Mask area setting function Masking Size setting function SizeSensitivity setting function Sensitivity Alarm interval setting function IntervalÜü, íí, óó, ññ Direction settingV vertical value is flashing, then press the Cursor c button Size settingMotion Size display table Returning to the default setting MOTION/MASKING Menu Back END Maximum Sensitivity settingThis sets the movement amplitude of subjects on the screen MOTION/ZOOM, Interval Zoom settingAlarm Sign setting Interval settingChecking the detected movements set by the Motion item Image is zoomed in when a movement is detectedCamera ID flashes on-screen when a movement is detected Active Move Differ Option settings Aperture setting Gamma setting AGC settingPanning For FIX modeOPTION/FIXI Tilt Returning to the default settingsZooming For VAR modeOPTION/VAR ZOOM, Tilt RS-485 setting Mirror settingAbout SW No Address settingTerminate setting SET button Initial settingOperations using the camera Menu screens Operations Using the System ControllerIris level operations Operations using the camera command Camera buttonElectronic zoom White balance and AWC-LOCK settings Setting the Sense UP and electronic shutterBacklight correction settings 4321 Menu DisplayMenu Display Picture is not clear TroubleshootingNo picture on the monitor screen Camera SpecificationsDimensions mm AccessoriesExclusions