Sanyo VCC-6974 instruction manual Option settings

Page 50

USING THE MENU SCREEN

OPTION

OPTION settings

The following settings can be made from the OPTION menu.

AAPERTURE setting:

This adjustment is used when you would like to correct outlines.

BAGC setting:

This automatically amplifies the image signal when filming in slightly dark places so that the picture becomes brighter.

CGAMMA setting:

The GAMMA characteristics can be set to “1” or “0.45”.

DZOOM setting:

A fixed mode and a variable mode are available. In fixed mode, the zoom ratios are set to X2, X4 and X8. In variable mode, the zoom ratio can be changed smoothly. Pan and tilt operations are also available.

EMIRROR setting

The image can be rotated horizontally then vertically or vertically then horizontally.

FRS-485 setting

You can set the communication parameters.

GINITIAL setting:

This returns all settings to the factory default settings (initial values).

1Press the SET button for about 3 seconds. The MAIN MENU screen will be displayed.

2Press the CURSOR (l) button to select the OPTION setting “SET” (the setting will flash), and then press the SET button. The OPTION MENU screen will be displayed.

SET		MAIN MENU
SET
		LANGUAGE	SET	p
		CAMERA ID	OFF
		SYNC	INT
		IRIS	AI	p
		WHITE BALANCE	ATW	p
		SHUTTER	OFF
		MOTION	ON
CURSOR	SET	OPTION	SET	p
	SET
		OPTION MENU
		APERTURE	ON	p
		AGC	ON
		GAMMA	ON
		ZOOM	OFF
		MIRROR	OFF	p
		RS-485	SET	p
		INITIAL	OFF
		MENU	BACK

English 49

Image 50

Contents About this manual Propos de ce manuelContents FeaturesPour la clientèle canadienne Information to UserFor the customers in Canada Precautions Alarm output terminal ALARM, C, a Power indicator PowerVideo output connector Video OUT BNC type Parts NamesMenu setting button SET Camera setup section under the coverLens iris output connector Lens Cursor button CursorLens mount cap DC type auto-iris lens If using a Video type auto-iris lensConcerning AUTO-IRIS Lenses Video type auto-iris lensMount type lens Mounting the LensRemove the lens mount cap from the camera Rewiring the lens cable in the lens iris plug Flange-back adjustmentCoaxial cable type and maximum length ConnectionsBasic connection for monitoring or recording Connection to a multiplexer RS-485 terminal connectionsConnection to a VCR Preset will return to the zoom pan, tilt center position About the Alarm output terminalRemote controller circuit connections Switching to sub-menu screens Using the Menu ScreenUsing the Cursor button Switching to the Main Menu screenUsing the Menu Screen Language setting Then press the SET buttonDetermining the start position for character input Camera ID settingExample To set the camera ID to BN1 Changing the camera ID to a new IDDisplay will return to the Camera ID Setting screen External sync VBS Sync settingsInternal synchronization INT Power supply synchronization setting L L External sync setting VBS Menu Back END Lens Type setting Iris settingAI Auto Iris mode setting Adjust the Iris Level setting DC type lens only BLC settingAI/BLCMULTI BLC/EVAL 5-section photometry mode setting BLC Window Weighting screen will be displayedWeighting Returning the values to the default settingsPress the Cursor l, then d or c button until EI Sense UP settingEI Electronic Iris mode setting Manual white balance MWB White Balance settingAutomatic color temperature tracking setting ATW Masking setting White BALANCE/ATWMASKINGMenu Back END Push-lock white balance adjustment AWC Press and hold the SET buttonManual white balance setting MWB Long exposure mode Long Electronic Shutter settingShort mode Short For Short mode For Long mode When Motion is set to ON, Long mode cannot be selectedExample Motion settingIris Sense UP mode has been set. Refer to Sensitivity setting function Sensitivity Size setting function SizeMask area setting function Masking Alarm interval setting function IntervalDirection setting Üü, íí, óó, ññSize setting V vertical value is flashing, then press the Cursor c buttonMotion Size display table Returning to the default setting MOTION/MASKING Menu Back END Maximum Sensitivity settingThis sets the movement amplitude of subjects on the screen Zoom setting MOTION/ZOOM, IntervalInterval setting Alarm Sign setting Checking the detected movements set by the Motion item Image is zoomed in when a movement is detected Camera ID flashes on-screen when a movement is detected Active Move Differ Option settings Aperture setting AGC setting Gamma settingFor FIX mode PanningReturning to the default settings OPTION/FIXI TiltFor VAR mode ZoomingOPTION/VAR ZOOM, Tilt Mirror setting RS-485 settingAbout SW No Address settingTerminate setting Initial setting SET buttonOperations Using the System Controller Operations using the camera Menu screensIris level operations Operations using the camera command Camera buttonElectronic zoom White balance and AWC-LOCK settings Setting the Sense UP and electronic shutterBacklight correction settings Menu Display 4321Menu Display Picture is not clear TroubleshootingNo picture on the monitor screen Specifications CameraAccessories Dimensions mmExclusions