Sanyo VCC-6974 instruction manual Specifications, Camera

Page 66
Electronic shutter

SPECIFICATIONS

Camera:

Scanning system

:

NTSC standard TV system (525 TV lines,

Interlace

:

30 frames/sec.)

PLL 2:1 interlace

Image device

:

1/3 inch solid state image device CCD

Picture elements

:

811 (H) x 508 (V)

Effective picture elements

:

768 (H) x 494 (V)

Synchronizing system

:

Internal sync, Line lock sync switchable,

Resolution

:

External sync

470 TV lines horizontally, 350 TV lines

 

 

vertically

: 8 speeds, selectable by setting

•SHORT: 1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 sec.

•LONG: X1, X2, X4, X8, X16, X32

Electronic sensitivity

:

AUTO/OFF, up to X32

Electronic zoom

:

ON/OFF

 

 

Continuance, up to X8

 

 

Fix, X2/X4/X8

Motion detector

:

Pan/tilt operation

ON/OFF

 

 

Alarm out: 2 pin terminal and RS-485

 

 

bus line

Video output level Video S/N ratio

Minimum required illumination (incandescent lighting)

Backlight compensation

:1.0 Vp-p/75 ohms, composite

:More than 48 dB

:Approx. 0.05 lux with a F 1.2 lens (32X electronic sensitivity),

Approx. 1.4 lux with a F 1.2 lens (normal mode)

:ON/OFF setting, Multi-zone light measuring system (Active when using an auto-iris lens)

AGC

:

ON/OFF

Gamma

:

ON/OFF (γ = 1)

Mirror image effect

:

H, V, H/V, 3 mode reverse image

Camera ID

:

ON/OFF, up to 8 characters

Communication

:

RS-485, operation via SSP

Lens mount

:

CS mount (or C mount with the

Environmental conditions

:

supplied adaptor)

Temperature: –10˚C ~ +50˚C

 

 

Humidity: less than 90% (no

Iris function

:

Manual ON/OFF switching

Electronic iris range

:

1.4 lux to 70,000 lux (F 1.2, lens: color

 

 

mode)

 

 

2.0 lux to 100,000 lux (F 1.4, lens: color

 

 

mode)

Flange-back

: 12.5 mm ± 0.5 mm

White balance

:

ATW/AWC/MWB setting

 

 

condensation)

Power supply

: 24 V AC/12 V DC, 60 Hz

Power consumption

:

24 V AC :

 

 

3.7

W (with auto-iris lens)

 

 

3.1

W (without auto-iris lens)

 

 

12 - 15 V:

 

 

4.0

W (with auto-iris lens)

 

 

2.9

W (without auto-iris lens)

Weight

:

Approx. 470 g (without lens)

English 65

Page 65 Page 67
Image 66
Page 65 Page 67
Contents About this manual Propos de ce manuelContents FeaturesInformation to User For the customers in CanadaPour la clientèle canadienne Precautions Alarm output terminal ALARM, C, a Power indicator PowerVideo output connector Video OUT BNC type Parts NamesMenu setting button SET Camera setup section under the coverLens iris output connector Lens Cursor button CursorLens mount cap DC type auto-iris lens If using a Video type auto-iris lensConcerning AUTO-IRIS Lenses Video type auto-iris lensMounting the Lens Remove the lens mount cap from the cameraMount type lens Rewiring the lens cable in the lens iris plug Flange-back adjustmentConnections Basic connection for monitoring or recordingCoaxial cable type and maximum length RS-485 terminal connections Connection to a VCRConnection to a multiplexer About the Alarm output terminal Remote controller circuit connectionsPreset will return to the zoom pan, tilt center position Switching to sub-menu screens Using the Menu ScreenUsing the Cursor button Switching to the Main Menu screenUsing the Menu Screen Language setting Then press the SET buttonDetermining the start position for character input Camera ID settingExample To set the camera ID to BN1 Changing the camera ID to a new IDDisplay will return to the Camera ID Setting screen Sync settings Internal synchronization INTExternal sync VBS Power supply synchronization setting L L External sync setting VBS Menu Back END Iris setting AI Auto Iris mode settingLens Type setting Adjust the Iris Level setting DC type lens only BLC settingAI/BLCMULTI BLC/EVAL 5-section photometry mode setting BLC Window Weighting screen will be displayedWeighting Returning the values to the default settingsSense UP setting EI Electronic Iris mode settingPress the Cursor l, then d or c button until EI White Balance setting Automatic color temperature tracking setting ATWManual white balance MWB Masking setting White BALANCE/ATWMASKINGMenu Back END Push-lock white balance adjustment AWC Press and hold the SET buttonManual white balance setting MWB Electronic Shutter setting Short mode ShortLong exposure mode Long For Short mode For Long mode When Motion is set to ON, Long mode cannot be selectedMotion setting Iris Sense UP mode has been set. Refer toExample Sensitivity setting function Sensitivity Size setting function SizeMask area setting function Masking Alarm interval setting function IntervalDirection setting Üü, íí, óó, ññSize setting V vertical value is flashing, then press the Cursor c buttonMotion Size display table Returning to the default setting MOTION/MASKING Menu Back END Sensitivity setting This sets the movement amplitude of subjects on the screenMaximum Zoom setting MOTION/ZOOM, IntervalInterval setting Alarm Sign settingImage is zoomed in when a movement is detected Camera ID flashes on-screen when a movement is detectedChecking the detected movements set by the Motion item Active Move Differ Option settings Aperture setting AGC setting Gamma settingFor FIX mode PanningReturning to the default settings OPTION/FIXI TiltFor VAR mode ZoomingOPTION/VAR ZOOM, Tilt Mirror setting RS-485 settingAddress setting Terminate settingAbout SW No Initial setting SET buttonOperations Using the System Controller Operations using the camera Menu screensOperations using the camera command Camera button Electronic zoomIris level operations Setting the Sense UP and electronic shutter Backlight correction settingsWhite balance and AWC-LOCK settings Menu Display 4321Menu Display Troubleshooting No picture on the monitor screenPicture is not clear Specifications CameraAccessories Dimensions mmExclusions
Top Page Image Contents