Sanyo VCC-6974 instruction manual Sense UP setting, EI Electronic Iris mode setting

Page 28

USING THE MENU SCREEN

AI/SENSE UP•EI

SENSE UP setting

Press the CURSOR (l) button so that the SENSE UP setting is at OFF and is flashing, then press the CURSOR (d or c) button to set the exposure time.

The basic exposure time is 1/60 second (SENSE UP set to OFF), and the setting can be changed to X2, X4, X8, X16 or X32.

Note:

•When the MOTION item is set to ON, the SENSE UP setting is not possible.

•When filming moving subjects, the higher the SENSE UP setting (sensitivity), the more pronounced afterimage will be visible. Also, when the sensitivity is high, white dots will be visible on the screen, this is due to the CCD characteristics.

CURSOR			ADJUSTMENT FOR AI
			LENS TYPE	DC
			BLC	OFF
			SENSE UP	OFF

BEI (Electronic Iris) mode setting

The EI mode setting is the same as for the AI mode setting with a DC type lens, please refer to page 22.

1Press the CURSOR (l, then d or c) button until “EI” in the

IRIS item is flashing, then press the SET button. The ADJUSTMENT FOR EI screen will be displayed.

2Press the CURSOR (l, then d or c) button to select MULTI or

EVAL for the BLC (backlight correction) setting.

Note:

•When the electronic iris function captures a very bright subject (such as a light, etc.), the quantity of light entering the lens cannot be adjusted, and image smearing and other conditions may appear. In such a case, this can be prevented by changing the lighting angle or using an auto-iris lens.

•The EI mode setting is used for indoors only.

•If the camera location lighting if fluorescent, it will be scattered by the subject. To prevent this, it is recommended to change to incandescent lighting.

OFF➞X2➞X4➞X8➞X16➞X32

SET

MAIN MENU

LANGUAGE

CAMERA ID

SYNC

IRIS

ADJUSTMENT FOR EI

SET	p	EVAL p
OFF	BLC	EVAL p
INT	SENSE UP	OFF
EI	p
	SET	MULTIp
		MULTIp

OFF

English 27

Image 28

Contents About this manual Propos de ce manuelContents FeaturesFor the customers in Canada Information to UserPour la clientèle canadienne Precautions Power indicator Power Video output connector Video OUT BNC typeAlarm output terminal ALARM, C, a Parts NamesCamera setup section under the cover Lens iris output connector LensMenu setting button SET Cursor button CursorLens mount cap If using a Video type auto-iris lens Concerning AUTO-IRIS LensesDC type auto-iris lens Video type auto-iris lensRemove the lens mount cap from the camera Mounting the LensMount type lens Rewiring the lens cable in the lens iris plug Flange-back adjustmentBasic connection for monitoring or recording ConnectionsCoaxial cable type and maximum length Connection to a VCR RS-485 terminal connectionsConnection to a multiplexer Remote controller circuit connections About the Alarm output terminalPreset will return to the zoom pan, tilt center position Using the Menu Screen Using the Cursor buttonSwitching to sub-menu screens Switching to the Main Menu screenUsing the Menu Screen Language setting Then press the SET buttonCamera ID setting Example To set the camera ID to BN1Determining the start position for character input Changing the camera ID to a new IDDisplay will return to the Camera ID Setting screen Internal synchronization INT Sync settingsExternal sync VBS Power supply synchronization setting L L External sync setting VBS Menu Back END AI Auto Iris mode setting Iris settingLens Type setting Adjust the Iris Level setting DC type lens only BLC settingAI/BLCMULTI BLC/EVAL 5-section photometry mode setting BLC Window Weighting screen will be displayedWeighting Returning the values to the default settingsEI Electronic Iris mode setting Sense UP settingPress the Cursor l, then d or c button until EI Automatic color temperature tracking setting ATW White Balance settingManual white balance MWB Masking setting White BALANCE/ATWMASKINGMenu Back END Push-lock white balance adjustment AWC Press and hold the SET buttonManual white balance setting MWB Short mode Short Electronic Shutter settingLong exposure mode Long For Short mode For Long mode When Motion is set to ON, Long mode cannot be selectedIris Sense UP mode has been set. Refer to Motion settingExample Size setting function Size Mask area setting function MaskingSensitivity setting function Sensitivity Alarm interval setting function IntervalDirection setting Üü, íí, óó, ññSize setting V vertical value is flashing, then press the Cursor c buttonMotion Size display table Returning to the default setting MOTION/MASKING Menu Back END This sets the movement amplitude of subjects on the screen Sensitivity settingMaximum Zoom setting MOTION/ZOOM, IntervalInterval setting Alarm Sign settingCamera ID flashes on-screen when a movement is detected Image is zoomed in when a movement is detectedChecking the detected movements set by the Motion item Active Move Differ Option settings Aperture setting AGC setting Gamma settingFor FIX mode PanningReturning to the default settings OPTION/FIXI TiltFor VAR mode ZoomingOPTION/VAR ZOOM, Tilt Mirror setting RS-485 settingTerminate setting Address settingAbout SW No Initial setting SET buttonOperations Using the System Controller Operations using the camera Menu screensElectronic zoom Operations using the camera command Camera buttonIris level operations Backlight correction settings Setting the Sense UP and electronic shutterWhite balance and AWC-LOCK settings Menu Display 4321Menu Display No picture on the monitor screen TroubleshootingPicture is not clear Specifications CameraAccessories Dimensions mmExclusions