Polaroid Splash II Care and Maintenance of the Sealing Gasket, Depth Rating 65FT M

in place and the latch is securely locked to avoid water from entering the Housing;

•Never use petroleum solvents, such as alcohol or thinner to clean the Housing;

•Be careful not to scratch the lens section of the Housing;

•Do not subject the Housing to extreme heat, such as in direct sunlight, in a sealed vehicle or the dash board;

•Do not store the Housing in a damp or humid environment.

Care and Maintenance of the Sealing Gasket

The Housing comes with an airtight waterproof seal. Improper handling and maintenance of the sealing gasket can cause leakage and possibly flood the camera.

•Always inspect the sealing gasket for scratches, cracks or cuts. Do not attempt to remove the sealing gasket from the Housing.

•Make sure that there are no foreign particles such as dust, sand or hair on the groove or contact surface of the sealing gasket. Otherwise, the Housing would not be sealed properly, thereby possibly causing leakage or even flood the camera. If necessary, wash the seal thoroughly in fresh water, then dry with a lint-free cloth.

SPECIFICATIONS

COMPATIBLE CAMERA(S): POLAROID 290SL, 298SL & 390AF

DEPTH RATING: 65FT. (20M)

DIMENSIONS: 135MM X 90.0MM X 60MM(W X H X D)

WEIGHT (WITHOUT CAMERA): 226G

-10-

515216-EN 10 9/10/04, 11:12:41 AM

En