Sony HD 3CCD operating instructions HD-SDI Menu, PC-OUTPUT Menu, Sync VD

HD-SDI Menu

The HD-SDI menu is displayed only when the HFBK- HD1 HD Interface Board is inserted into the card slot of the camera.

<HD-SDI>

>ANALOG OUT YPbPr

SYNC/VDSYNC

ANALOG OUT

Select the component signal output from the MONITOR connector (D-sub 15-pin) on the HFBK-HD1 HD Interface Board.

YPbPr: Outputs analog component signals.

RGB: Outputs RGB signals.

SYNC VD

Select the signal output from the SYNC output on the MONITOR connector

SYNC: Outputs the tri-level sync. VD: Outputs the bi-level sync.

ADD SYNC

Appears when RGB is selected with ANALOG OUT and specifies whether to add a sync signal.

RGB: Outputs each R, G and B signal with a sync signal added.

OFF: Outputs each signal with no sync signal added.

PC-OUTPUT Menu

The PC-OUTPUT menu is displayed only when the HFBK-XG1 XGA Interface Board is inserted into the card slot of the camera.

<PC-OUTPUT>

>IMG SIZE VGA[LETTER]

SYNCON

IMG-SIZE (image size)

Select the signal format and aspect ratio of the output signal.

XGA [CROP]: Outputs XGA (4:3 edge crop).

VGA [LETTER]: Outputs VGA (16:9 letterbox).

XGA [LETTER]: Outputs XGA (16:9 letterbox).

VGA [CROP]: Outputs VGA (4:3 edge crop).

WXGA: Outputs WXGA.

SYNC

Specifies whether to add a sync signal to the G signal. ON: Outputs the G signal with a sync signal added. OFF: Outputs the G signal with no sync signal added.

VD

Select the VD polarity according to the monitor to be used.

POS: Positive

NEG: Negative

Adjusting and Setting With Menus

HD-SDI Menu / PC-OUTPUT Menu

37