Sony HD 3CCD operating instructions HFBK-SD1 SD Interface Board, HFBK-HD1 HD Interface Board

CCFC-M100HG Optical Fiber Cable HFBK-XG1 XGA Interface Board

This is a 2-core multi-mode optical fiber cable of 100 m (328 feet) long.

Supplied accessories: extension plug

HFBK-SD1 SD Interface Board

Insert the board into the camera or the HD Optical Multiplex Unit to allow output of an analog video signal such as the composite video, S video, component video and RGB signals, or a down-converted SD-SDI signal.

HFBK-HD1 HD Interface Board

Insert the board into the camera or the HD Optical Multiplex Unit to allow output of a signal conforming to SMPTE292M serial digital interface standards, or output of an analog video signal (component/RGB).

Insert the board into the camera or the HD Optical Multiplex Unit to allow output of a signal conforming to the VESA standards (VGA, XGA or WXGA).

HFBK-TS1 HDV Interface Board

Insert the board into the camera or the HD Optical Multiplex Unit to allow conversion of the video signal from the camera and the input audio signal into the signal conforming to the HDV standards.

BRBK-H700 HD Optical Multiplex Card

Insert the card into the camera to allow high-bit multiplex transfer via optical fiber cable (video, audio, external video sync and control signals).

Video Switcher (commercially available)

It switches the video signal input of multiple cameras.

Overview

System Components

9