Sony HD 3CCD operating instructions Turn the dial on the upper part of the joystick

If the camera moves in a different direction from that you intended

The camera is preset to face toward the right whenever the joystick is inclined to the right. You might wish to face the camera toward the opposite direction from that in which you inclined the joystick, for example, when you change the direction of the camera while checking the picture on the screen. In such a case, press the POSITION 2 (REV) button while holding down the L/R DIRECTION button.

To reset the setting, press the POSITION 1 (STD) button while holding down the L/R DIRECTION button.

Joystick	Movement of the	Setting
	camera
Incline to the right.		While holding down
		L/R
		DIRECTION
		1
		9
		STD
		Press.
Incline to the right.		While holding down
		L/R
		DIRECTION
		2
		10
		REV
		Press.

Note

The setting above only changes the signal emitted from the RM-BR300 Remote Control Unit, and does not change the setting of the camera itself.

If the STANDBY lamp of the camera flashes

When the camera is moved or turned by hand or by external shock, the microcomputer inside the camera may not be able to memorize the pan/tilt position properly.

To reset the pan/tilt position, press the PAN-TILT RESET button.

Zooming

Turn the dial on the upper part of the joystick.

Subject appears farther	Subject appears closer.
away. (Wide angle)	(Telephoto)

Note

When you perform pan/tilt operation while the camera is in the telephoto mode, the moving speed of the image on the screen may be a little jerky.

Operation Using the RM-BR300 Remote Control Unit

STANDBY flashes.

Pan/Tilt and Zoom Operation

45