Sony HD 3CCD Pan/Tilt and Zoom Operation, Turning on the Power, Panning and Tilting

Operation Using the Supplied Remote Commander

Before operating, check that the camera and peripheral devices are properly installed and connected.

For details, see “Installation” (page 50) and “Connections” (page 54).

Pan/Tilt and Zoom Operation

Panning and Tilting

POWER 1

Turning on the Power

CAMERA	SELECT		3	MANUAL
	2
1	FOCUS NEAR					BACK		LIGHT
AUTO	FAR
		SCREEN								3
							REV
	DATA								2
STD				STD
					1					5
								4
									PRESET

HOME

CAMERA SELECT

REV

6					2
RESET
POSITION	-TILT		-TILT		PAN-TILT
PAN			PAN
		HOME	RESET		RESET
			FAST
		SLOW	ZOOM	T
			T	W	-EV	100
			W		RM

to AC outlet POWER lights.

1 Connect the camera to an AC outlet using the supplied AC power adaptor and power cord. The power is turned on and the POWER lamp lights.

The camera will automatically pan and tilt and be reset to the position stored in POSITION 1 (Pan/tilt reset action).

2 Turn on the peripheral devices.

To turn on/off the camera using the Remote Commander

As long as the camera is connected to an AC outlet, you can turn the camera on or off with the POWER switch on the Remote Commander.

When you turn the power off using the Remote Commander, the POWER lamp turns off and the STANDBY lamp lights on the camera.

		POWER
CAMERA SELECT
1	2	3
FOCUS
AUTO		MANUAL
FAR	NEAR
DATA SCREEN		BACK LIGHT

POWER STANDBY lights.

L/R	SET
IRECTION
D

L/R DIRECTION

SET

1 Press the POWER switch.

The camera will turn on and perform the pan/tilt reset action automatically.

2 Press the arrow button to pan or tilt the camera. While checking the picture on the screen, press the desired arrow button.

To move the camera little by little, press the button just for a moment.

To move the camera in a wide range, press and hold the button.

To move the camera diagonally, press the B or b button while holding down the V or v button.

To face the camera back to the front

Press the HOME button.

If you accidentally move the camera with your hand

Press the PAN-TILT RESET button to perform the pan/ tilt reset action.

If the camera moves in a different direction from that you intended

The camera is preset to face toward the right whenever the b button is pressed. You might wish to face the camera toward the opposite direction from that of the button you pressed, for example, when you change the direction of the camera while checking the picture on the screen. In such a case, press the 2 (REV) button while holding down the L/R DIRECTION SET button.

To reset the setting, press the 1 (STD) button while holding down the L/R DIRECTION SET button.

Operation Using the Supplied Remote Commander

Turning on the Power / Pan/Tilt and Zoom Operation

39