Sony HD 3CCD To assign camera addresses manually, Direction REV 1STD PAN-TILT Reset

3 Hold down the RESET button and press the POWER button on the Remote Control Unit.

The Remote Control Unit recognizes the connected cameras and assigns them camera addresses 1 to 7 automatically in the connected order.

4 Press the POWER button on the Remote Control Unit and check that the CAMERA buttons light. The number of the lit CAMERA buttons indicates how many cameras have the addresses assigned. Now you can switch the camera you want to control with the Remote Control Unit by pressing the CAMERA button.

To assign camera addresses manually

Set one of the camera addresses, 1 to 7, using the camera address selectors on the bottom of each camera.

For setting the camera address selectors, see page 19.

Operation Using the RM-BR300 Remote Control Unit

Pan/Tilt and Zoom

Operation

Panning and Tilting

L/R DIRECTION						REV
			1STD							PAN-TILT RESET
	VALUE	LOCK			PANEL	BLACK PAN-TILT		ONE PUSH
					LIGHT	LIGHT	RESET		AWB		MENU
			RESET
–	+
	R		PRESET			POSITION
		MODE
	BRIGHT
			SHIFT	1	2	3	4	5	6	7	8
				9	10	11	12	13	14	15	16
–	+		L/R	STD	REV
	B		DIRECTION			CAMERA
		AUTO
	FOCUS	AUTO	POWER	1	2	3	4	5	6	7
		MANUAL
		ONE PUSH
NEAR FAR		AF
		POWER						2			3

1 Turn on the power of the camera and the RM- BR300 Remote Control Unit.

The camera will turn on, performing the pan/tilt reset action automatically.

2 Press the CAMERA button corresponding to the camera you want to operate.

3 Operate the joystick to pan or tilt the camera. While checking the picture on the screen, incline the joystick in the desired direction.

The panning/tilting speed changes according to the angle at which you incline the joystick.

Release the joystick to stop panning/tilting.

To face the camera back to the front

Press the button on the top of the joystick for one or two seconds.

Press for 1 or 2 seconds.

If you accidentally move the camera with your hand

Press the PAN-TILT RESET button to perform the pan/ tilt reset action.

44

Pan/Tilt and Zoom Operation