Installation and Connections
10 Connect the cables to the connectors on the rear of the camera.
Ceiling
Note
Take the proper steps to ensure that the load of the cables connected does not cause problems.
11 Attach the cable cover.
For attachment, see page 50.
The SONY and/or HD nameplates can be turned upside down, if necessary,
To remove the camera
1 Remove the three screws used to attach the camera in step 9 of “Installation.”
2 Turn the camera with the bracket counterclockwise to remove.
Connections
Connecting to an AC Outlet
Use the supplied AC power adaptor and AC power cord to connect the camera to an AC outlet.
AC power adaptor
to AC outlet
DC IN 12V
AC power cord (supplied)
54
Connections