JVC GV-DS2 manual Step by Step Capture, Set-up Capture Mode Step by Step

EN 27

STEP BY STEP CAPTURE

Use the Step by Step Capture mode when you want to: •Capture a smaller number of images

•Confirm the images being captured.

Set-up
Capture Mode	Step by Step
Image Format	Automatic
Device Change
Preroll
Initialize
ID Change
Counter Reset

JLIP Video Capture

File Edit Set-up Window

CAPTURE TRANSFER

NOTES:

•Index image/Full image data are transferred to the image display boxes bordered in green. Click and select the desired box(es).

•When transferring full image data using the Bitmap image format (9.bmp), the transfer takes a very long time, causing the video source unit to stop playback automatically.

Preparation

•Make sure all units are properly connected (☞ p. 12).

•Click "Image Format" in "Set-up" and select the desired format (☞ p. 32).

1 Open the menu bar and click "Set-up" — "Capture Mode" — "Step by Step".

•The Step by Step Mode is entered.

2 Click "CAPTURE" on the image you want to capture.

•Click "Window" — "VCR" to have the VCR scan the picture in the VCR Operate window (☞ p. 25).

•When you press the CAPTURE button, full image data (768 x 552 pixels) is captured into the Video Capture Docking Station memory. Index image data (80 x 60 pixels) is simultaneously transferred to the computer.

3 Index image data is transferred to the computer.

•The message "No.1 index image being transferred" appears during data transfer.

4 The message "Transfer the full image ? Yes/No" appears. Click "Yes". Full image data (768 x 552 pixels) is transferred to the computer.

•You cannot use the TRANSFER button in Step by Step Transfer mode.

5 The full image data is transferred to the computer.

•The message "No.1 image being transferred" appears during data transfer.

6 Repeat steps 2 through 5 as required.