JVC GV-DS2 manual EN Basic OP E Ration S, Dubbing, Prepare NEW Tape, Start Editing

52EN BASICOPERATIONS (cont.)

Dubbing

You can record all programmed scenes onto the tape in the recording deck.

JLIP VIDEO PRODUCER										1
File Edit Set-up Window Help
COUNTER Non Drop			00:00:00:09F		ID	06	FILE
POWER		ON OFF		MEMO
PROGRAM PLAYBACK				SCENE	START			BF	WF
SCENE		CUT IN		CUT OUT					B W
						BF				2
01	00:05:00:12			00:06:04:16					TC
02	00:06:10:12			00:07:30:15
03	00:07:33:10			00:08:45:15			BW
04	00:08:51:05			00:10:13:12
	ELAPSED TIME			00:04:58:19F			EC
							IN/OUT

PREPARE NEW TAPE

Make sure the erase protection tab on the tape is present. Then insert it into the recording deck and set the recording deck to the Record-Pause mode.

START EDITING

Click "START" on the JLIP VIDEO PRODUCER window.

When editing stops, the camcorder enters the Stop mode and the recording deck enters the Record-Pause mode.

•During dubbing, do no operation other than pressing "STOP". If other opera- tions are done, a malfunction may occur.

3 STOP EDITING Stop the recording deck.

NOTES:

JLIP VIDEO PRODUCER
File Edit Set-upWindow	Help
ID Change	00:00:00:11F	ID	06	FILE
COUNTER
Device Change
Name Change	MEMO
POWER
Recorder Select

Record Timing	SCENE	START	BF WF
PROGRAM
Preroll	Standard		B W
SCENE Counter Reset	Long	OUT
Function Set
Close Selial			TC
Initialize
			BW
ELAPSED TIME	00:00:00:00F		EC

IN/OUT

●Also refer to the camcorder's instruction manual on dubbing.

●There may be small margin between the CUT IN/OUT points you input and the dubbed scenes' ones.

●Dubbing is impossible using a camcorder whose JLIP connector serves as an Edit jack.

●If there are disturbances in the images at the CUT IN/OUT points when using a recording deck with High-Speed (Turbo) Search, change the Preroll time setting from "Standard" to "Long".