JVC GV-DS2 manual Select Scene, Start Playback

EN 51

Playing back one programmed scene

JLIP VIDEO PRODUCER									1
File Edit Set-up Window Help
COUNTER Non Drop			00:00:00:09F		ID	06	FILE
POWER		ON OFF		MEMO
PROGRAM PLAYBACK				SCENE	START		BF	WF
SCENE		CUT IN		CUT OUT				B W
						BF			2
01	00:05:00:12			00:06:04:16				TC
02	00:06:10:12			00:07:30:15
03	00:07:33:10			00:08:45:15			BW
04	00:08:51:05			00:10:13:12
	ELAPSED TIME			00:04:58:19F			EC
							IN/OUT

SELECT SCENE

Click on the line where the CUT IN/OUT points you want to preview are displayed and that line will be highlighted.

START PLAYBACK

Click "SCENE".

•The camcorder searches the scene by going to a point prior to the CUT IN point and starts playback at the CUT IN point. Playback stops after the CUT OUT point is passed.

JLIP VIDEO PRODUCER
File Edit Set-up Window Help
COUNTER Non Drop			00:00:00:09F		ID	06	FILE
POWER		ON OFF		MEMO
PROGRAM PLAYBACK				SCENE	START		BF	WF
SCENE		CUT IN		CUT OUT				B W
						BF
01	00:05:00:12			00:06:04:16				TC
02	00:06:10:12			00:07:30:15
03	00:07:33:10			00:08:45:15			BW
04	00:08:51:05			00:10:13:12
	ELAPSED TIME			00:04:58:19F			EC
							IN/OUT

NOTE:

When one programmed scene with a Fade/ Wipe Effect is played back, the scene is played back but its Fade/Wipe Effect is not executed.

Playing back all programmed scenes

1 START PLAYBACK

Click "START".

•The camcorder plays back scenes in numerical order and stops immediately after the last scene's CUT OUT point.

•Only the camcorder moves.

NOTES:

●During playback of programmed scenes, do no operation other than pressing "STOP".

If other operations are done, a malfunction may occur.

●If "SCENE" or "START" is clicked at the end of tape, the camcorder will not function properly.

●If the source tape has a blank portion, scenes will not be edited properly.

●If connected to a recording deck equipped with a JLIP connector, make sure a tape is not loaded in the recording deck when you click "START".