Panasonic AWRP120GJ Recalling tracing memory Recall, Standby Recall, Press Stop button

Page 19
Recording stops and the tracing memory is saved.
The registered number button turns on and the status returns to that of step 3.
zzWhen the possible recording time elapses, recording stops automatically.
At that time, operations up until the point in time that recording stops are recorded.
Operating tracing memory (TMEM) (continued)
7. Press START button [11]..
The indicator of START button [11] turns on. (Operation wait state)
TM05: Waiting Opr.
8. Operate one of the PAN/TILT lever, ZOOM button, FOCUS dial, IRIS dial, and white balance mode selection buttons..
The recording of tracing memory starts from the point in time that the operation began.
zzTo record the focus operation and iris operation, press the focus button and auto iris button to turn off their indicators and then perform the operations.
Recording time
TM05:0m02s Storing.

Recalling tracing memory (RECALL)

1. Press one of the camera selection buttons [CAMERA SELECT/GROUP SELECT] to select the remote camera to be operated..

2. Press the TMEM button to turn on its indicator..

The tracing memory status appears.

The indicators of number buttons with registered tracing memory turn on.

Selected camera number

CAM1 TMEM

3m50s Remained.

Remaining possible recording time (max.. 5 m 00 s)

 

Note

9. Press STOP button [12]..

zzA button with no tracing memory registered does not turn on

even when it is a button with preset memory registered.

3. Press one of the number buttons that has its indicator turned on to specify the tracing memory number..

The remote camera moves to the start position.

The indicators of the number button that was pressed and START button [11] blink. (Recall standby state)

TM03:0m00s/ 0 m 5 9 s

Standby Recall.

4. Press START button [11]..

The tracing memory is recalled and the remote camera starts moving.

The indicator of START button [11] turns on.

Total time of tracing

Current recall memory during recalling

Tracing memory number position

TM03:0m20s/ 0 m 5 9 s

Recalling.

5. When the recording time elapses, the remote camera stops automatically..

The number button that was blinking turns on, the indicator of START button [11] turns off, and the process returns to step 2. zzWhen STOP button [12] is pressed during recalling, recalling stops

and the process returns to step 2.

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Operating Instructions Illustrations and screen images in this manual About trademarks and registered trademarksCopyrights AbbreviationsContents How to turn on the power of the remote cameras How to turn on and off the power of the remote cameras„„Turning off the power of all the cameras How to turn off the power of the remote camerasTurning off the power one camera at a time Turning off the power of multiple camerasBars button Making image adjustments for the selected remote cameraColor adjustment section ZzR and B pedestalAutomatically adjusting the white balance Setting the gainSetting the pedestal Setting the white balanceAutomatically adjusting the black balance Setting the black balanceManually adjusting the white balance R and B gain settings Auto tracking white adjustment ATWSetting the shutter speed Setting the detailAdjusting the shutter speed Setting the shutter modeAW‑HE50 Setting the shooting mode Scene 1 to SceneSelecting an ND filter with the User buttons User 1 to User Setting an ND filterND Filter ND1Operate the OSD menu Hold down the Camera OSD button to turn on its indicatorHold down the Camera OSD button to turn off its indicator Operating the osd menu of a remote cameraPmem Operating preset memory PmemZzLighting of number button indicators ZzChanging pagesRecalling preset memory Recall Registering preset memory StoreDeleting preset memory Delete Iris Scope Mode aScope settings and recalled items Recalled item Setting SpeedPM GRP1 Mode Separate Operating preset memory groups Pmem GroupSetting the operation mode SEPARATE/ ALL Creating preset memory groupsPressing a button to recall a preset memory group Recalling preset memory groupsRegistering the preset memory to recall when in ALL mode PM GRP1 Mode ALL3m50s Remained Operating tracing memory TmemRegistering tracing memory Store CAM1 TmemPress Stop button Recalling tracing memory RecallStandby Recall RecallingRestoring Restoring tracing memory RestoreStandby Restore Deleting tracing memory DeleteRecalled item Setting Setting the items to recall when recalling tracing memoryT Curv Configuring the remote camera operation settingsSetting the PAN/TILT lever inclination and speed „„Operation of Speed dialSetting the zooming direction Setting the pan, tilt, zoom, and focus operation directionsSetting the panning direction Setting the tilting directionSpeed with Z Off Setting the minimum lens zoom start speedSetting the focusing direction MIN Speed„„When AW-HE50, AW-HE60, or AW-HE120 Setting procedure„„When other remote camera Controlling a heater or fan Returning a remote cameras to its home positionControlling a defroster Controlling a wiperButton indicator on or blinking Configuring the unit operation settingsEnabling or disabling operation with the Enable buttons Press the Enable buttonDisabling Menu operation Enabling or disabling menu operationEnabling Menu operation LCD Backligh T Off Switching the focus operation and iris operationSetting the LCD panel backlight FOCUS/IRIS StandardUSER1 Assigning functions to the User buttonsINPUT1 Setting linking with a switcher„„Settings for the connection between unit and switcher „„Settings on the switcherBUS AUX Buscont functionEnabling or disabling the Buscont function BuscontEnabling or disabling the Camera Select function Setting the Focus Assist functionFocus Assist function Camera Select view functionT/Z Control CAM Tally IP functionEnabling or disabling the Tally IP function TallyipCAM INF Caminfformat CAM INF AlarmCAM INF function Enabling or disabling the CAM INF functionLoad Memory card operationsZzMemory cards SaveSaving data to a memory card Save Initializing a memory card InitDeleting the files saved to a memory card Delete Loading data from a memory card LoadTally OUT Tally settings„„Settings on remote cameras Tally IN1Displaying alarm information Checking alarm informationPower No Alarm ALL Setup Returning the unit to the factory default state InitializeSetting items stored on the unit SetupSetting items stored on the unit Returning the unit to the factory default stateInitialize ALL AW‑RP120 CAM OUT1 Registering camera numbers to CAM OUT1 to CAM OUT10Installing the software Setup SoftwareEnter the IP addresses in the IP address boxes Registering the unit in Setup SoftwareSettings for connecting with the remote cameras and switcher Displaying the Setting tab Initializing the IP addresses Executing auto IP settingAcquiring the connection settings Changing the connection destination IP addressesEnter the same password as above in the Retype password box Setting user authenticationClicking Refresh clears the user name and password Campinp POS Campinp ModeOperations of AW-HE2 Campinp CTLDial/button Setting item Remote camera Table of setting items dedicated dials and buttonsVideo Table of setting items menusFilm Table of setting items menus SW Setup SW CTL Operation lock When starting up and switching camera groupsPreset memory MessagesMemory card IP connection settingsMessages Xx Menu IndexIndex プロフェッショナルAVビジネスユニット
Top Page Image Contents