Panasonic AWRP120GJ Operating the osd menu of a remote camera, Operate the OSD menu

Page 12

Operating the osd menu of a remote camera

To set the advanced settings of a remote camera, operate the menu superimposed on the image output of the remote camera (this menu is referred to as the OSD menu in this manual). The OSD menu of a connected remote camera can be operated from the unit.

F1 dial

CAMERA OSD button

F2 dial

EXIT button

1.Hold down the CAMERA OSD button to turn on its indicator..

The OSD menu appears on the selected remote camera and becomes able to be operated from the unit.

2.Operate the OSD menu..

Use the F1 dial, F2 dial, and EXIT button to operate the OSD menu. Operation differs depending on the model connected.

<Table of operations>

Remote camera

 

Dial/button operation

OSD menu operation

AW‑HE50

Turn the F1 dial.

zzMoves the items (*1).

zzSelects a setting (*2).

 

 

AW‑HE60

 

 

 

Press the F1 dial.

Confirms the change to the selected setting.

AW‑HE120

Press the EXIT button.

Cancels the selected setting.

 

AK‑HC1500

Turn the F1 dial.

zzMoves the items (*1).

zzSelects a setting (*3).

 

 

AK‑HC1800

 

 

 

Press the F1 dial.

Confirms the change to the selected setting.

AW‑HE870

Press the EXIT button.

Cancels the selected setting.

 

AW‑E350

Turn the F1 dial.

Moves the items (*1).

Press the F1 dial.

Confirms the sub-menu selection.

AW‑E650

AW‑E750

 

 

zzChanges the setting directly (*4)

AW‑E860

Turn the F2 dial.

AW‑HE100

zzConfirms the sub-menu selection.

 

 

 

 

 

 

(*1) Turn clockwise

 

: Moves the items up.

 

Turn counterclockwise

: Moves the items down.

 

(*2) Turn clockwise

 

: Changes the setting in the plus (+) direction.

Turn counterclockwise

: Changes the setting in the minus (–) direction.

(*3) Turn clockwise

 

: Changes the setting in the minus (–) direction.

Turn counterclockwise

: Changes the setting in the plus (+) direction.

(*4) Turning the dial changes the setting and instantaneously reflects the new value on the remote camera.

Turn clockwise

:

Changes the setting in the plus (+) direction and confirms the value.

Turn counterclockwise

:

Changes the setting in the minus (–) direction and confirms the value.

3.Hold down the CAMERA OSD button to turn off its indicator..

The menus of the unit become able to be operated.

Notes

zzWhen the unit is operating the OSD menu of a remote camera, the CAMERA OSD button lighting state and OSD menu display state may no longer match and OSD menu operation may not be able to be performed properly if the OSD menu OFF operation is performed for the same remote camera from, for example, another remote camera controller or a wireless remote controller.

In such a case, hold down the CAMERA OSD button on the unit, and after the CAMERA OSD button lighting state (off) and OSD menu display state (OSD menu hidden) match, hold down the CAMERA OSD button again and then perform the operation.

zzIf a camera selection button [CAMERA SELECT/GROUP SELECT] is pressed to switch to another remote camera to control from the unit during the display of the OSD menu of a remote camera, the OSD menu of the remote camera that was selected disappears.

zzFor details on the menu items that are displayed, check the operating instructions for the corresponding model.

12

Image 12
Contents Operating Instructions About trademarks and registered trademarks CopyrightsAbbreviations Illustrations and screen images in this manualContents How to turn on and off the power of the remote cameras How to turn on the power of the remote camerasHow to turn off the power of the remote cameras Turning off the power one camera at a timeTurning off the power of multiple cameras „„Turning off the power of all the camerasMaking image adjustments for the selected remote camera Color adjustment sectionZzR and B pedestal Bars buttonSetting the gain Setting the pedestalSetting the white balance Automatically adjusting the white balanceSetting the black balance Manually adjusting the white balance R and B gain settingsAuto tracking white adjustment ATW Automatically adjusting the black balanceSetting the detail Adjusting the shutter speedSetting the shutter mode Setting the shutter speedSetting the shooting mode Scene 1 to Scene AW‑HE50Setting an ND filter ND FilterND1 Selecting an ND filter with the User buttons User 1 to UserHold down the Camera OSD button to turn on its indicator Hold down the Camera OSD button to turn off its indicatorOperating the osd menu of a remote camera Operate the OSD menuOperating preset memory Pmem ZzLighting of number button indicatorsZzChanging pages PmemRegistering preset memory Store Recalling preset memory RecallDeleting preset memory Delete Scope Mode a Scope settings and recalled items Recalled item SettingSpeed IrisOperating preset memory groups Pmem Group Setting the operation mode SEPARATE/ ALLCreating preset memory groups PM GRP1 Mode SeparateRecalling preset memory groups Registering the preset memory to recall when in ALL modePM GRP1 Mode ALL Pressing a button to recall a preset memory groupOperating tracing memory Tmem Registering tracing memory StoreCAM1 Tmem 3m50s RemainedRecalling tracing memory Recall Standby RecallRecalling Press Stop buttonRestoring tracing memory Restore Standby RestoreDeleting tracing memory Delete RestoringSetting the items to recall when recalling tracing memory Recalled item SettingConfiguring the remote camera operation settings Setting the PAN/TILT lever inclination and speed„„Operation of Speed dial T CurvSetting the pan, tilt, zoom, and focus operation directions Setting the panning directionSetting the tilting direction Setting the zooming directionSetting the minimum lens zoom start speed Setting the focusing directionMIN Speed Speed with Z OffSetting procedure „„When AW-HE50, AW-HE60, or AW-HE120„„When other remote camera Returning a remote cameras to its home position Controlling a defrosterControlling a wiper Controlling a heater or fanConfiguring the unit operation settings Enabling or disabling operation with the Enable buttonsPress the Enable button Button indicator on or blinkingEnabling or disabling menu operation Disabling Menu operationEnabling Menu operation Switching the focus operation and iris operation Setting the LCD panel backlightFOCUS/IRIS Standard LCD Backligh T OffAssigning functions to the User buttons USER1Setting linking with a switcher „„Settings for the connection between unit and switcher„„Settings on the switcher INPUT1Buscont function Enabling or disabling the Buscont functionBuscont BUS AUXSetting the Focus Assist function Focus Assist functionCamera Select view function Enabling or disabling the Camera Select functionTally IP function Enabling or disabling the Tally IP functionTallyip T/Z Control CAMCaminfformat CAM INF Alarm CAM INF functionEnabling or disabling the CAM INF function CAM INFMemory card operations ZzMemory cardsSave LoadInitializing a memory card Init Saving data to a memory card SaveLoading data from a memory card Load Deleting the files saved to a memory card DeleteTally settings „„Settings on remote camerasTally IN1 Tally OUTChecking alarm information Displaying alarm informationPower No Alarm Returning the unit to the factory default state Initialize Setting items stored on the unitSetup ALL SetupReturning the unit to the factory default state Setting items stored on the unitInitialize ALL AW‑RP120 Registering camera numbers to CAM OUT1 to CAM OUT10 CAM OUT1Setup Software Installing the softwareRegistering the unit in Setup Software Enter the IP addresses in the IP address boxesSettings for connecting with the remote cameras and switcher Displaying the Setting tab Executing auto IP setting Acquiring the connection settingsChanging the connection destination IP addresses Initializing the IP addressesSetting user authentication Enter the same password as above in the Retype password boxClicking Refresh clears the user name and password Campinp Mode Operations of AW-HE2Campinp CTL Campinp POSTable of setting items dedicated dials and buttons Dial/button Setting item Remote cameraTable of setting items menus VideoFilm Table of setting items menus SW Setup SW CTL When starting up and switching camera groups Preset memoryMessages Operation lockIP connection settings Memory cardMessages Index Xx MenuIndex プロフェッショナルAVビジネスユニット