Panasonic AWRP120GJ Setting the pan, tilt, zoom, and focus operation directions, Normal

Page 23

Configuring the remote camera operation settings (continued)

Setting the pan, tilt, zoom, and focus operation directions

You can set the direction that a remote camera moves in response to the operation of the PAN/TILT lever, ZOOM button, and FOCUS dial. With this unit, you can set the direction for each camera number.

Setting the panning direction

Set the operation of the remote camera in the horizontal direction in response to the horizontal operation of the PAN/TILT lever.

Setting the tilting direction

Set the operation of the remote camera in the vertical direction in response to forward and backward operation of the PAN/TILT lever.

1.Press the MENU button..

2.Open TILT DIRECTION menu [27]..

3.Turn the F1 dial to display the camera number for which to configure the setting..

1. Press the MENU button..

2. Open PAN DIRECTION menu [26]..

3. Turn the F1 dial to display the camera number for which to configure the setting..

1.CAM1

NORMAL

4.Turn the F2 dial to select “NORMAL” or “REVERSE”, and then press the F2 dial to confirm the selection..

NORMAL

: The remote camera moves to the left when the PAN/

 

TILT lever is moved toward the left, and to the right

 

when the lever is moved toward the right.

REVERSE

: Operation is in the opposite direction to NORMAL.

1.CAM1

NORMAL

4.Turn the F2 dial to select “NORMAL” or “REVERSE”, and then press the F2 dial to confirm the selection..

NORMAL

: The remote camera moves upward when the PAN/

 

TILT lever is moved away from you, and downward

 

when the lever is moved toward you.

REVERSE

: Operation is in the opposite direction to NORMAL.

Setting the zooming direction

Set the zooming operation of the lens in response to the operation of the ZOOM button.

1.Press the MENU button..

2.Open ZOOM DIRECTION menu [28]..

3. Turn the F1 dial to display the camera number for which to configure the setting..

1.CAM1

NORMAL

4.Turn the F2 dial to select “NORMAL” or “REVERSE”, and then press the F2 dial to confirm the selection..

NORMAL

: The lens zooms toward the telephoto end when

 

the TELE side of the ZOOM button is pressed, and

 

toward the wide-angle end when the WIDE side is

 

pressed.

REVERSE

: Operation is in the opposite direction to NORMAL.

23

Image 23
Contents Operating Instructions Illustrations and screen images in this manual About trademarks and registered trademarksCopyrights AbbreviationsContents How to turn on the power of the remote cameras How to turn on and off the power of the remote cameras„„Turning off the power of all the cameras How to turn off the power of the remote camerasTurning off the power one camera at a time Turning off the power of multiple camerasBars button Making image adjustments for the selected remote cameraColor adjustment section ZzR and B pedestalAutomatically adjusting the white balance Setting the gainSetting the pedestal Setting the white balanceAutomatically adjusting the black balance Setting the black balanceManually adjusting the white balance R and B gain settings Auto tracking white adjustment ATWSetting the shutter speed Setting the detailAdjusting the shutter speed Setting the shutter modeAW‑HE50 Setting the shooting mode Scene 1 to SceneSelecting an ND filter with the User buttons User 1 to User Setting an ND filterND Filter ND1Operate the OSD menu Hold down the Camera OSD button to turn on its indicatorHold down the Camera OSD button to turn off its indicator Operating the osd menu of a remote cameraPmem Operating preset memory PmemZzLighting of number button indicators ZzChanging pagesDeleting preset memory Delete Registering preset memory StoreRecalling preset memory Recall Iris Scope Mode aScope settings and recalled items Recalled item Setting SpeedPM GRP1 Mode Separate Operating preset memory groups Pmem GroupSetting the operation mode SEPARATE/ ALL Creating preset memory groupsPressing a button to recall a preset memory group Recalling preset memory groupsRegistering the preset memory to recall when in ALL mode PM GRP1 Mode ALL3m50s Remained Operating tracing memory TmemRegistering tracing memory Store CAM1 TmemPress Stop button Recalling tracing memory RecallStandby Recall RecallingRestoring Restoring tracing memory RestoreStandby Restore Deleting tracing memory DeleteRecalled item Setting Setting the items to recall when recalling tracing memoryT Curv Configuring the remote camera operation settingsSetting the PAN/TILT lever inclination and speed „„Operation of Speed dialSetting the zooming direction Setting the pan, tilt, zoom, and focus operation directionsSetting the panning direction Setting the tilting directionSpeed with Z Off Setting the minimum lens zoom start speedSetting the focusing direction MIN Speed„„When other remote camera Setting procedure„„When AW-HE50, AW-HE60, or AW-HE120 Controlling a heater or fan Returning a remote cameras to its home positionControlling a defroster Controlling a wiperButton indicator on or blinking Configuring the unit operation settingsEnabling or disabling operation with the Enable buttons Press the Enable buttonEnabling Menu operation Enabling or disabling menu operationDisabling Menu operation LCD Backligh T Off Switching the focus operation and iris operationSetting the LCD panel backlight FOCUS/IRIS StandardUSER1 Assigning functions to the User buttonsINPUT1 Setting linking with a switcher„„Settings for the connection between unit and switcher „„Settings on the switcherBUS AUX Buscont functionEnabling or disabling the Buscont function BuscontEnabling or disabling the Camera Select function Setting the Focus Assist functionFocus Assist function Camera Select view functionT/Z Control CAM Tally IP functionEnabling or disabling the Tally IP function TallyipCAM INF Caminfformat CAM INF AlarmCAM INF function Enabling or disabling the CAM INF functionLoad Memory card operationsZzMemory cards SaveSaving data to a memory card Save Initializing a memory card InitDeleting the files saved to a memory card Delete Loading data from a memory card LoadTally OUT Tally settings„„Settings on remote cameras Tally IN1Power No Alarm Checking alarm informationDisplaying alarm information ALL Setup Returning the unit to the factory default state InitializeSetting items stored on the unit SetupInitialize ALL Returning the unit to the factory default stateSetting items stored on the unit AW‑RP120 CAM OUT1 Registering camera numbers to CAM OUT1 to CAM OUT10Installing the software Setup SoftwareEnter the IP addresses in the IP address boxes Registering the unit in Setup SoftwareSettings for connecting with the remote cameras and switcher Displaying the Setting tab Initializing the IP addresses Executing auto IP settingAcquiring the connection settings Changing the connection destination IP addressesClicking Refresh clears the user name and password Setting user authenticationEnter the same password as above in the Retype password box Campinp POS Campinp ModeOperations of AW-HE2 Campinp CTLDial/button Setting item Remote camera Table of setting items dedicated dials and buttonsFilm Table of setting items menusVideo Table of setting items menus SW Setup SW CTL Operation lock When starting up and switching camera groupsPreset memory MessagesMessages IP connection settingsMemory card Xx Menu IndexIndex プロフェッショナルAVビジネスユニット