Panasonic AWRP120GJ Selecting the color bars, Setting the detail, Adjusting the shutter speed

Page 9

Making image adjustments for the selected remote camera (continued)

Selecting the color bars

Press the BARS button to output color bar signals from the remote camera.

Button indicator on : Outputs the color bar signal

Button indicator off : Outputs the signal for the images shot by the camera

Setting the detail

The image detail (image sharpness) can be adjusted.

1.Press the DETAIL button..

The current detail setting appears.

DETAIL :

On

F1 dial

LEVEL :

LOW

F2 dial

2.Turn the F1 dial and F2 dial to select settings..

Adjusting the shutter speed

The shutter mode and shutter speed of a remote camera can be selected.

1.Press the MENU button to turn on its indicator..

2.Open SHUTTER menu [21]..

Setting the shutter mode

3.Turn the F1 dial to display the “1.  SHUTTER” item..

1.SHUTTER

Off

4.Turn the F2 dial to select the shutter mode, and then press the F2 dial to confirm the selection..

Off

: Turns off the electronic shutter.

Step

: Operates the shutter at the shutter speed set in the

 

“2. SPEED” item.

Synchro : Operates the shutter at the shutter speed set for the

 

remote camera.

 

Set the shutter speed value for synchro mode in the

 

OSD menu of the remote camera.

 

For details, refer to the operating instructions for the

 

remote camera.

ELC

: Controls the electronic shutter and automatically adjusts

 

the light quantity.

zzThe shutter mode settings differ depending on the remote camera connected. Check the operating instructions for the corresponding model.

Setting the shutter speed

When “Step” has been selected as the shutter mode, you can specify the shutter speed.

5..Turn the F1 dial to display the “2.  SPEED” item..

2.SPEED

1/100

6..Turn the F2 dial to adjust the shutter speed..

zzThe shutter speed settings differ depending on the remote camera connected. Check the operating instructions for the corresponding model.

Note

zzFor a remote camera connected via a serial connection, when you change the camera group once and then return to the original camera group, the shutter speed is set to “1/100”.

9

Image 9
Contents Operating Instructions Copyrights About trademarks and registered trademarksAbbreviations Illustrations and screen images in this manualContents How to turn on the power of the remote cameras How to turn on and off the power of the remote camerasTurning off the power one camera at a time How to turn off the power of the remote camerasTurning off the power of multiple cameras „„Turning off the power of all the camerasColor adjustment section Making image adjustments for the selected remote cameraZzR and B pedestal Bars buttonSetting the pedestal Setting the gainSetting the white balance Automatically adjusting the white balanceManually adjusting the white balance R and B gain settings Setting the black balanceAuto tracking white adjustment ATW Automatically adjusting the black balanceAdjusting the shutter speed Setting the detailSetting the shutter mode Setting the shutter speedAW‑HE50 Setting the shooting mode Scene 1 to SceneND Filter Setting an ND filterND1 Selecting an ND filter with the User buttons User 1 to UserHold down the Camera OSD button to turn off its indicator Hold down the Camera OSD button to turn on its indicatorOperating the osd menu of a remote camera Operate the OSD menuZzLighting of number button indicators Operating preset memory PmemZzChanging pages PmemRegistering preset memory Store Recalling preset memory RecallDeleting preset memory Delete Scope settings and recalled items Recalled item Setting Scope Mode aSpeed IrisSetting the operation mode SEPARATE/ ALL Operating preset memory groups Pmem GroupCreating preset memory groups PM GRP1 Mode SeparateRegistering the preset memory to recall when in ALL mode Recalling preset memory groupsPM GRP1 Mode ALL Pressing a button to recall a preset memory groupRegistering tracing memory Store Operating tracing memory TmemCAM1 Tmem 3m50s RemainedStandby Recall Recalling tracing memory RecallRecalling Press Stop buttonStandby Restore Restoring tracing memory RestoreDeleting tracing memory Delete RestoringRecalled item Setting Setting the items to recall when recalling tracing memorySetting the PAN/TILT lever inclination and speed Configuring the remote camera operation settings„„Operation of Speed dial T CurvSetting the panning direction Setting the pan, tilt, zoom, and focus operation directionsSetting the tilting direction Setting the zooming directionSetting the focusing direction Setting the minimum lens zoom start speedMIN Speed Speed with Z OffSetting procedure „„When AW-HE50, AW-HE60, or AW-HE120„„When other remote camera Controlling a defroster Returning a remote cameras to its home positionControlling a wiper Controlling a heater or fanEnabling or disabling operation with the Enable buttons Configuring the unit operation settingsPress the Enable button Button indicator on or blinkingEnabling or disabling menu operation Disabling Menu operationEnabling Menu operation Setting the LCD panel backlight Switching the focus operation and iris operationFOCUS/IRIS Standard LCD Backligh T OffUSER1 Assigning functions to the User buttons„„Settings for the connection between unit and switcher Setting linking with a switcher„„Settings on the switcher INPUT1Enabling or disabling the Buscont function Buscont functionBuscont BUS AUXFocus Assist function Setting the Focus Assist functionCamera Select view function Enabling or disabling the Camera Select functionEnabling or disabling the Tally IP function Tally IP functionTallyip T/Z Control CAMCAM INF function Caminfformat CAM INF AlarmEnabling or disabling the CAM INF function CAM INFZzMemory cards Memory card operationsSave LoadSaving data to a memory card Save Initializing a memory card InitDeleting the files saved to a memory card Delete Loading data from a memory card Load„„Settings on remote cameras Tally settingsTally IN1 Tally OUTChecking alarm information Displaying alarm informationPower No Alarm Setting items stored on the unit Returning the unit to the factory default state InitializeSetup ALL SetupReturning the unit to the factory default state Setting items stored on the unitInitialize ALL AW‑RP120 CAM OUT1 Registering camera numbers to CAM OUT1 to CAM OUT10Installing the software Setup SoftwareEnter the IP addresses in the IP address boxes Registering the unit in Setup SoftwareSettings for connecting with the remote cameras and switcher Displaying the Setting tab Acquiring the connection settings Executing auto IP settingChanging the connection destination IP addresses Initializing the IP addressesSetting user authentication Enter the same password as above in the Retype password boxClicking Refresh clears the user name and password Operations of AW-HE2 Campinp ModeCampinp CTL Campinp POSDial/button Setting item Remote camera Table of setting items dedicated dials and buttonsTable of setting items menus VideoFilm Table of setting items menus SW Setup SW CTL Preset memory When starting up and switching camera groupsMessages Operation lockIP connection settings Memory cardMessages Xx Menu IndexIndex プロフェッショナルAVビジネスユニット