Panasonic AWRP120GJ Initializing a memory card Init, Saving data to a memory card Save

Page 37

Memory card operations (continued)

Initializing a memory card (INIT)

Before using a memory card with the unit, be sure to initialize the

memory card with the unit..

When the memory card is initialized, the memory card is formatted (in compliance with SD standards) and dedicated directories are created.

Note

zzIf you initialize a memory card, all of the files stored in the memory card will be deleted.

1.Press the MENU button to turn on its indicator..

2.Open SD DELETE menu [48]..

DEL MODE :SETUP

3.Turn the F1 dial to display the “INIT” item, and then press the F1 dial to confirm the selection..

DEL MODE :INIT

NO

4.Turn the F2 dial to select “YES”..

DEL MODE :INIT

YES

Saving data to a memory card (SAVE)

1.Press one of the camera selection buttons [CAMERA SELECT/GROUP SELECT] to select a remote camera..

2.Press the MENU button to turn on its indicator..

3.Open SD SAVE menu [46]..

SAVE MODE:SETUP

4.Turn the F1 dial to select the type of data to save to the memory card, and then press the F1 dial to confirm the selection..

The file name assigned automatically in accordance with the selected data type is displayed on the second line of the LCD panel.

SAVE MODE:MEM

RP10.m12

zzYou can select a data type from SETUP, MEM, CAM, and LOG. zzThe name of the file to be saved cannot be changed from the unit. zzWhen no memory card is inserted, “NO CARD!” appears.

zzUp to 99 files of each of SETUP, MEM, CAM, and LOG can be saved to one memory card.

When 99 files already exist, “OVER 99FILES!” appears, and saving is not possible.

Delete files and then execute saving again.

⇒“Deleting the files saved to a memory card (DELETE)” (page 38)

5.Press the F2 dial..

Initialization of the memory card begins.

zzWhen no memory card is inserted, “NO CARD!” appears.

INITIALIZING...

5.Press the F2 dial to confirm the selection..

Saving to the memory card begins.

SAVING...

NOT REMOVE CARD.

COMPLETE.COMPLETE.

zzWhen initialization completes, “COMPLETE.” appears.

zzWhen initialization fails, “INITIAL ERROR!” appears. Replace the memory card and then execute initialization again.

zzWhen saving completes, “COMPLETE.” appears.

zzWhen saving fails, “SAVE ERROR!” appears. Replace the memory card and then execute saving again.

37

Image 37

Contents Operating Instructions Copyrights About trademarks and registered trademarksAbbreviations Illustrations and screen images in this manualContents How to turn on the power of the remote cameras How to turn on and off the power of the remote camerasTurning off the power one camera at a time How to turn off the power of the remote camerasTurning off the power of multiple cameras „„Turning off the power of all the camerasColor adjustment section Making image adjustments for the selected remote cameraZzR and B pedestal Bars buttonSetting the pedestal Setting the gainSetting the white balance Automatically adjusting the white balanceManually adjusting the white balance R and B gain settings Setting the black balanceAuto tracking white adjustment ATW Automatically adjusting the black balanceAdjusting the shutter speed Setting the detailSetting the shutter mode Setting the shutter speedAW‑HE50 Setting the shooting mode Scene 1 to SceneND Filter Setting an ND filterND1 Selecting an ND filter with the User buttons User 1 to UserHold down the Camera OSD button to turn off its indicator Hold down the Camera OSD button to turn on its indicatorOperating the osd menu of a remote camera Operate the OSD menuZzLighting of number button indicators Operating preset memory PmemZzChanging pages PmemRecalling preset memory Recall Registering preset memory StoreDeleting preset memory Delete Scope settings and recalled items Recalled item Setting Scope Mode aSpeed IrisSetting the operation mode SEPARATE/ ALL Operating preset memory groups Pmem GroupCreating preset memory groups PM GRP1 Mode SeparateRegistering the preset memory to recall when in ALL mode Recalling preset memory groupsPM GRP1 Mode ALL Pressing a button to recall a preset memory groupRegistering tracing memory Store Operating tracing memory TmemCAM1 Tmem 3m50s RemainedStandby Recall Recalling tracing memory RecallRecalling Press Stop buttonStandby Restore Restoring tracing memory RestoreDeleting tracing memory Delete RestoringRecalled item Setting Setting the items to recall when recalling tracing memorySetting the PAN/TILT lever inclination and speed Configuring the remote camera operation settings„„Operation of Speed dial T CurvSetting the panning direction Setting the pan, tilt, zoom, and focus operation directionsSetting the tilting direction Setting the zooming directionSetting the focusing direction Setting the minimum lens zoom start speedMIN Speed Speed with Z Off„„When AW-HE50, AW-HE60, or AW-HE120 Setting procedure„„When other remote camera Controlling a defroster Returning a remote cameras to its home positionControlling a wiper Controlling a heater or fanEnabling or disabling operation with the Enable buttons Configuring the unit operation settingsPress the Enable button Button indicator on or blinkingDisabling Menu operation Enabling or disabling menu operationEnabling Menu operation Setting the LCD panel backlight Switching the focus operation and iris operationFOCUS/IRIS Standard LCD Backligh T OffUSER1 Assigning functions to the User buttons„„Settings for the connection between unit and switcher Setting linking with a switcher„„Settings on the switcher INPUT1Enabling or disabling the Buscont function Buscont functionBuscont BUS AUXFocus Assist function Setting the Focus Assist functionCamera Select view function Enabling or disabling the Camera Select functionEnabling or disabling the Tally IP function Tally IP functionTallyip T/Z Control CAMCAM INF function Caminfformat CAM INF AlarmEnabling or disabling the CAM INF function CAM INFZzMemory cards Memory card operationsSave LoadSaving data to a memory card Save Initializing a memory card InitDeleting the files saved to a memory card Delete Loading data from a memory card Load„„Settings on remote cameras Tally settingsTally IN1 Tally OUTDisplaying alarm information Checking alarm informationPower No Alarm Setting items stored on the unit Returning the unit to the factory default state InitializeSetup ALL SetupSetting items stored on the unit Returning the unit to the factory default stateInitialize ALL AW‑RP120 CAM OUT1 Registering camera numbers to CAM OUT1 to CAM OUT10Installing the software Setup SoftwareEnter the IP addresses in the IP address boxes Registering the unit in Setup SoftwareSettings for connecting with the remote cameras and switcher Displaying the Setting tab Acquiring the connection settings Executing auto IP settingChanging the connection destination IP addresses Initializing the IP addressesEnter the same password as above in the Retype password box Setting user authenticationClicking Refresh clears the user name and password Operations of AW-HE2 Campinp ModeCampinp CTL Campinp POSDial/button Setting item Remote camera Table of setting items dedicated dials and buttonsVideo Table of setting items menusFilm Table of setting items menus SW Setup SW CTL Preset memory When starting up and switching camera groupsMessages Operation lockMemory card IP connection settingsMessages Xx Menu IndexIndex プロフェッショナルAVビジネスユニット