Panasonic AWRP120GJ Registering preset memory Store, Recalling preset memory Recall

Page 14

Operating preset memory (PMEM) (continued)

Registering preset memory (STORE)

1.Press one of the camera selection buttons [CAMERA SELECT/GROUP SELECT] to select the remote camera to be operated..

2.Output the images to be shot to the monitor..

3.Press the PMEM button to turn on its indicator..

4.Press the MEM STORE button to turn on its indicator..

5.Operate the PAN/TILT lever and ZOOM button to determine the camera angle to register..

If necessary, adjust the focus and iris as well.

6.Hold down a number button to specify the preset number to register..

“STORE COMPLETE” appears on the second line of the LCD panel. The current camera positions and settings are registered to the preset memory of the remote camera.

zzTo continue registering different camera angles to a preset memory belonging to the same “page number”, repeat steps 5 to 6.

Notes

zzWhen registering preset data, hold down the number button. zzIf a number button that already has preset memory registered

is held down, the saved data will be deleted as it will be overwritten.

Recalling preset memory (RECALL)

1.Press one of the camera selection buttons [CAMERA SELECT/GROUP SELECT] to select the remote camera to be operated..

2.Press the PMEM button to turn on its indicator..

3.Hold down a number button to specify the preset number to recall..

The registered settings are recalled.

zzWhen the indicator of the MEM STORE button or MEM DELETE button is on, preset memory is not recalled when a number button is pressed.

Press the PMEM button or press the MEM STORE button or MEM DELETE button with the indicator turned on to turn off its indicator, and then perform the operation.

Deleting preset memory (DELETE)

1.Press one of the camera selection buttons [CAMERA SELECT/GROUP SELECT] to select the remote camera to be operated..

2.Press the PMEM button to turn on its indicator..

3.Press the MEM DELETE button to turn on its indicator..

4.Hold down a number button to specify the preset number to delete..

“DELETE COMPLETE” appears on the second line of the LCD panel and the registered settings are deleted.

Notes

zzWhen deleting preset data, hold down the number button. zzWhen the preset number used with tracing memory is held down, the tracing data is also deleted at the same time.

⇒For details on tracing memory, refer to “Operating tracing memory (TMEM)” (page 18).

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Operating Instructions Abbreviations About trademarks and registered trademarksCopyrights Illustrations and screen images in this manualContents How to turn on and off the power of the remote cameras How to turn on the power of the remote camerasTurning off the power of multiple cameras How to turn off the power of the remote camerasTurning off the power one camera at a time „„Turning off the power of all the camerasZzR and B pedestal Making image adjustments for the selected remote cameraColor adjustment section Bars buttonSetting the white balance Setting the gainSetting the pedestal Automatically adjusting the white balanceAuto tracking white adjustment ATW Setting the black balanceManually adjusting the white balance R and B gain settings Automatically adjusting the black balanceSetting the shutter mode Setting the detailAdjusting the shutter speed Setting the shutter speedSetting the shooting mode Scene 1 to Scene AW‑HE50ND1 Setting an ND filterND Filter Selecting an ND filter with the User buttons User 1 to UserOperating the osd menu of a remote camera Hold down the Camera OSD button to turn on its indicatorHold down the Camera OSD button to turn off its indicator Operate the OSD menuZzChanging pages Operating preset memory PmemZzLighting of number button indicators PmemDeleting preset memory Delete Registering preset memory StoreRecalling preset memory Recall Speed Scope Mode aScope settings and recalled items Recalled item Setting IrisCreating preset memory groups Operating preset memory groups Pmem GroupSetting the operation mode SEPARATE/ ALL PM GRP1 Mode SeparatePM GRP1 Mode ALL Recalling preset memory groupsRegistering the preset memory to recall when in ALL mode Pressing a button to recall a preset memory groupCAM1 Tmem Operating tracing memory TmemRegistering tracing memory Store 3m50s RemainedRecalling Recalling tracing memory RecallStandby Recall Press Stop buttonDeleting tracing memory Delete Restoring tracing memory RestoreStandby Restore RestoringSetting the items to recall when recalling tracing memory Recalled item Setting„„Operation of Speed dial Configuring the remote camera operation settingsSetting the PAN/TILT lever inclination and speed T CurvSetting the tilting direction Setting the pan, tilt, zoom, and focus operation directionsSetting the panning direction Setting the zooming directionMIN Speed Setting the minimum lens zoom start speedSetting the focusing direction Speed with Z Off„„When other remote camera Setting procedure„„When AW-HE50, AW-HE60, or AW-HE120 Controlling a wiper Returning a remote cameras to its home positionControlling a defroster Controlling a heater or fanPress the Enable button Configuring the unit operation settingsEnabling or disabling operation with the Enable buttons Button indicator on or blinkingEnabling Menu operation Enabling or disabling menu operationDisabling Menu operation FOCUS/IRIS Standard Switching the focus operation and iris operationSetting the LCD panel backlight LCD Backligh T OffAssigning functions to the User buttons USER1„„Settings on the switcher Setting linking with a switcher„„Settings for the connection between unit and switcher INPUT1Buscont Buscont functionEnabling or disabling the Buscont function BUS AUXCamera Select view function Setting the Focus Assist functionFocus Assist function Enabling or disabling the Camera Select functionTallyip Tally IP functionEnabling or disabling the Tally IP function T/Z Control CAMEnabling or disabling the CAM INF function Caminfformat CAM INF AlarmCAM INF function CAM INFSave Memory card operationsZzMemory cards LoadInitializing a memory card Init Saving data to a memory card SaveLoading data from a memory card Load Deleting the files saved to a memory card DeleteTally IN1 Tally settings„„Settings on remote cameras Tally OUTPower No Alarm Checking alarm informationDisplaying alarm information Setup Returning the unit to the factory default state InitializeSetting items stored on the unit ALL SetupInitialize ALL Returning the unit to the factory default stateSetting items stored on the unit AW‑RP120 Registering camera numbers to CAM OUT1 to CAM OUT10 CAM OUT1Setup Software Installing the softwareRegistering the unit in Setup Software Enter the IP addresses in the IP address boxesSettings for connecting with the remote cameras and switcher Displaying the Setting tab Changing the connection destination IP addresses Executing auto IP settingAcquiring the connection settings Initializing the IP addressesClicking Refresh clears the user name and password Setting user authenticationEnter the same password as above in the Retype password box Campinp CTL Campinp ModeOperations of AW-HE2 Campinp POSTable of setting items dedicated dials and buttons Dial/button Setting item Remote cameraFilm Table of setting items menusVideo Table of setting items menus SW Setup SW CTL Messages When starting up and switching camera groupsPreset memory Operation lockMessages IP connection settingsMemory card Index Xx MenuIndex プロフェッショナルAVビジネスユニット
Top Page Image Contents