Panasonic AWRP120GJ Setting linking with a switcher, „„Settings on the switcher, INPUT1, Swlink

Page 31

Setting linking with a switcher

Configure the settings for linking the unit with an optional switcher. To use the function for linking with a switcher, you need to set the following in advance.

„„Settings for the connection between unit and switcher

Refer to “Settings for connecting with the remote cameras and switcher” in Basics (page 29).

„„Settings on the switcher

The following settings can be configured on the AW-HS50.zzEnabling the function for linking with the unit

Set the “10. CamContLink” item of [13] Operation Menu to “On”. zzDisplaying the remote camera names sent by the unit

Set the “4. Name Type” item of [10.1] Input Menu/SDI-IN1 to [10.4] Input Menu/SDI-IN4 or the “2. Name Type” item of [10.5] Input Menu/DVI-IN to “CAM Name”.

zzDisplaying icons at the bottom left of the sub screen for images of the remote camera selected on the unit when the switcher is outputting images of multi view..

Set “6. Input Status” of [8] MultiView Out/Frame Menu to “On”.

For details, refer to the operating instructions for the switcher.

„„Registering the camera numbers that will correspond to the image inputs of the switcher

Refer to the relevant explanation in this section.

„„Enabling or disabling the function for linking with the switcher

Refer to the relevant explanation in this section.

Registering the camera numbers that will correspond to the image inputs of the switcher

1. Press the MENU button..

2. Open SW INPUT menu [43]..

3. Turn the F1 dial to display the input signal of the switcher to be set..

1.INPUT1

CAM1

Input signal : Select from 1. INPUT1 to 100. INPUT100.

4.Turn the F2 dial to select the corresponding camera number, and then press the F2 dial to confirm the selection..

Enabling or disabling the function for linking with the switcher

Enable or disable the entire function for linking between the unit and switcher.

1.Press the MENU button..

2.Open SW FUNCTION menu [42]..

3.Turn the F1 dial to display the “1.  SWLINK” item..

1.SWLINK

On

4.Turn the F2 dial to select “On” or “Off”, and then press the F2 dial to confirm the selection..

On

:

Enables the function for linking with the switcher.

Off

:

Disables the function for linking with the switcher.

zzEnabling and disabling the link function can be assigned to a USER button.

Open USER BUTTON menu [35], display one of the “1.  USER1” to “8.  USER8” items, and set “SWLINK”..

zzWhen the USER button with “SWLINK” assigned is pressed, the operation is as follows.

Button indicator on : Enables the function for linking with the switcher.

Button indicator off : Disables the function for linking with the switcher.

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Operating Instructions Illustrations and screen images in this manual About trademarks and registered trademarksCopyrights AbbreviationsContents How to turn on the power of the remote cameras How to turn on and off the power of the remote cameras„„Turning off the power of all the cameras How to turn off the power of the remote camerasTurning off the power one camera at a time Turning off the power of multiple camerasBars button Making image adjustments for the selected remote cameraColor adjustment section ZzR and B pedestalAutomatically adjusting the white balance Setting the gainSetting the pedestal Setting the white balanceAutomatically adjusting the black balance Setting the black balanceManually adjusting the white balance R and B gain settings Auto tracking white adjustment ATWSetting the shutter speed Setting the detailAdjusting the shutter speed Setting the shutter modeAW‑HE50 Setting the shooting mode Scene 1 to SceneSelecting an ND filter with the User buttons User 1 to User Setting an ND filterND Filter ND1Operate the OSD menu Hold down the Camera OSD button to turn on its indicatorHold down the Camera OSD button to turn off its indicator Operating the osd menu of a remote cameraPmem Operating preset memory PmemZzLighting of number button indicators ZzChanging pagesRecalling preset memory Recall Registering preset memory StoreDeleting preset memory Delete Iris Scope Mode aScope settings and recalled items Recalled item Setting SpeedPM GRP1 Mode Separate Operating preset memory groups Pmem GroupSetting the operation mode SEPARATE/ ALL Creating preset memory groupsPressing a button to recall a preset memory group Recalling preset memory groupsRegistering the preset memory to recall when in ALL mode PM GRP1 Mode ALL3m50s Remained Operating tracing memory TmemRegistering tracing memory Store CAM1 TmemPress Stop button Recalling tracing memory RecallStandby Recall RecallingRestoring Restoring tracing memory RestoreStandby Restore Deleting tracing memory DeleteRecalled item Setting Setting the items to recall when recalling tracing memoryT Curv Configuring the remote camera operation settingsSetting the PAN/TILT lever inclination and speed „„Operation of Speed dialSetting the zooming direction Setting the pan, tilt, zoom, and focus operation directionsSetting the panning direction Setting the tilting directionSpeed with Z Off Setting the minimum lens zoom start speedSetting the focusing direction MIN Speed„„When AW-HE50, AW-HE60, or AW-HE120 Setting procedure„„When other remote camera Controlling a heater or fan Returning a remote cameras to its home positionControlling a defroster Controlling a wiperButton indicator on or blinking Configuring the unit operation settingsEnabling or disabling operation with the Enable buttons Press the Enable buttonDisabling Menu operation Enabling or disabling menu operationEnabling Menu operation LCD Backligh T Off Switching the focus operation and iris operationSetting the LCD panel backlight FOCUS/IRIS StandardUSER1 Assigning functions to the User buttonsINPUT1 Setting linking with a switcher„„Settings for the connection between unit and switcher „„Settings on the switcherBUS AUX Buscont functionEnabling or disabling the Buscont function BuscontEnabling or disabling the Camera Select function Setting the Focus Assist functionFocus Assist function Camera Select view functionT/Z Control CAM Tally IP functionEnabling or disabling the Tally IP function TallyipCAM INF Caminfformat CAM INF AlarmCAM INF function Enabling or disabling the CAM INF functionLoad Memory card operationsZzMemory cards SaveSaving data to a memory card Save Initializing a memory card InitDeleting the files saved to a memory card Delete Loading data from a memory card LoadTally OUT Tally settings„„Settings on remote cameras Tally IN1Displaying alarm information Checking alarm informationPower No Alarm ALL Setup Returning the unit to the factory default state InitializeSetting items stored on the unit SetupSetting items stored on the unit Returning the unit to the factory default stateInitialize ALL AW‑RP120 CAM OUT1 Registering camera numbers to CAM OUT1 to CAM OUT10Installing the software Setup SoftwareEnter the IP addresses in the IP address boxes Registering the unit in Setup SoftwareSettings for connecting with the remote cameras and switcher Displaying the Setting tab Initializing the IP addresses Executing auto IP settingAcquiring the connection settings Changing the connection destination IP addressesEnter the same password as above in the Retype password box Setting user authenticationClicking Refresh clears the user name and password Campinp POS Campinp ModeOperations of AW-HE2 Campinp CTLDial/button Setting item Remote camera Table of setting items dedicated dials and buttonsVideo Table of setting items menusFilm Table of setting items menus SW Setup SW CTL Operation lock When starting up and switching camera groupsPreset memory MessagesMemory card IP connection settingsMessages Xx Menu IndexIndex プロフェッショナルAVビジネスユニット
Top Page Image Contents