Pelco cs73m-d Time and Date Setup, Programming Methods, Programming with a Keyboard

PROGRAMMING

TIME AND DATE SETUP

You can apply a single time and date and camera title to each input channel, which will appear on all four output channels. You can also select whether the channel will display:

¥Time, date, and title

¥Time and date only

¥Title only

¥No added text

In addition, you can select:

NOTE: The CM9760-MDA Setup program provides an interface that supports the message text feature of the MDA. (For additional infor- mation, refer to the Set Mes- sage Text section of this manual.) The CM9760-KBD, KBD200A, and KBD300A keyboards do not provide an interface that supports message text.

¥Time and date format, and set the title to be displayed

¥Character brightness

¥On-screen location for time, date, and title

PROGRAMMING METHODS

The MDA unit is password protected and can be programmed by using a CM9760-KBD, KBD200A, or KBD300A keyboard or by using a PC.

There are two DIP switches to select the input and output port formats, and one to identify the MDA unit. See the Communication Ports Setup and Address Setup for Daisy Chaining sections for information on the DIP switches.

You can program the unit in two ways.

¥The first method uses a CM9760-KBD, KBD200A, or KBD300A keyboard and the pro- gramming monitor output. See the Programming with a Keyboard section for instructions.

¥The second method requires a PC running Microsoft¨ Windows¨ and the CM9760-MDA Setup program. See the Programming with the CM9760-MDA Setup Program section for instructions.

PROGRAMMING WITH A KEYBOARD

The KBD200A uses keys for pan/tilt, while the CM9760-KBD and KBD300A use a joystick.

KEYBOARD KEYS AND JOYSTICK

Use the keyboard and the programming video output to manually program the CM9760-MDA.

Any joystick motion or pan/tilt key activates the Main Menu. Use the joystick or pan/tilt keys to navigate menus. Use the following keyboard keys to program the MDA.

Open	Use this key to move down through selections in program mode.
Close	Use this key to move up through selections in program mode.
Near	Use this key to quickly exit a menu and return to the Main Menu from
	any submenu or to exit program mode without having to select EXIT on
	the Main Menu.
Pan/Tilt Controls	The pan/tilt keys or joystick controls the cursorÕs position. Moving the
	joystick up and down or pressing the up/down keys maneuvers through
	the menu selection. Moving the joystick left and right or pressing the
	left/right keys positions the cursor horizontally when a menu has more
	than one item on a line. Moving the cursor to the right on RETURN on
	a menu, or on any item in the Main Menu, selects the item.
Blue Buttons	(Not applicable to the KBD200A/300A keyboards.) The line of blue
	buttons directly below the CM9760-KBD keyboard screen corresponds
	to the line of icons on the bottom of the screen. To select one of the
	icons, press the blue button directly beneath it.

Pelco Manual C573M-D (11/03) 15