Pelco cs73m-d Position, Display, Brightness, Enable Time, Date, Enable Video, Output

NOTE: At least one output display must be turned on and you must use this out- put on a monitor to see its position.

The fields (or items to be set) are defined as follows:

POSITION	The first item to set is the display position, which is digitally selected
DISPLAY	and controlled by the keyboard. To move the output display, position
	the cursor at item 1. The Ò1Ó flashes. Press the joystick right to choose
	the item. Press the joystick up/down and left/right to position the
	display on the monitor. See Figure 35 for the output display. At least
	one output display must be on and you must use this output on a
	monitor to see its position. To return to the Camera Display Menu after
	setting the position display, press the OPEN or CLOSE key.
BRIGHTNESS	To set brightness, press the joystick down to position the cursor at the
	brightness item on the menu. Use the OPEN key to increase
	brightness and the CLOSE key to decrease it. Brightness numbers
	range from 1 (darkest) to 8 (brightest). Brightness changes on the
	menu as you change the number.

ENABLE TITLES You toggle this field on/off by placing the cursor on the selection and pressing the OPEN key. You can activate or deactivate the titles on a camera-by-camera basis. The selection immediately appears on the menu.

ENABLE TIME	You toggle this field on/off by placing the cursor on the selection and
DATE	pressing the OPEN key. You can activate or deactivate the time and
	date on a camera-by-camera basis. The selection immediately appears
	on the menu.
ENABLE VIDEO	Use this field to direct the alphanumeric data (text) to the desired
DISPLAY	output. In the example in Figure 12, outputs 1 and 3 will have alpha-
OUTPUT	numeric information while outputs 2 and 4 will not. To change the
	settings, position the cursor at locations A, B, C, or D and press the
	OPEN or CLOSE key to turn the settings ON or OFF.

As shipped from the factory, the four outputs for the title, time, and date display are ON. Brightness is set to level 5.

Position the cursor at RETURN and press the joystick right to return to the Main Menu. You can also press the NEAR key to exit this menu.

Pelco Manual C573M-D (11/03) 19