Pelco cs73m-d operation manual Reset MDA, System Requirements, Stop Bits, Parity

STOP BITS	The number flashes. Use the OPEN or CLOSE key to choose between
	1 and 2 stop bits. Press the joystick down to move to the next field.
PARITY	The three options for this field are none, odd, and even. The first
	character in the word flashes when you access this field. Use the
	OPEN or CLOSE key to move through the three selections. When you
	leave this field, the program keeps the last selection.

Position the cursor at RETURN and press the joystick right to return to the Main Menu, or press the NEAR key.

RESET MDA

If you choose item 6 on the Main Menu, the program displays the following menu:

YOU ARE ABOUT TO

RESET THIS UNIT TO

THE ORIGINAL FACTORY

SETTINGS

ARE YOU SURE? NO

Figure 15. Reset CM9760-MDA Screen

This screen lets you reset the CM9760-MDAÕs software to the original factory settings. You can change the selection from ÒNOÓ to ÒYESÓ on the line that asks ÒARE YOU SURE?Ó by pressing the OPEN key. The unit returns to the original factory settings for titles, cable compensation, time, date, and communication ports when you place the cursor on RETURN and press the joystick right.

Position the cursor at RETURN and press the joystick right to return to the Main Menu, or press the NEAR key.

PROGRAMMING WITH THE CM9760-MDA SETUP PROGRAM

CM9760-MDA SETUP PROGRAM DESCRIPTION

Using a PC, the CM9760-MDA Setup program allows you to set camera titles, cable compensation, camera display, time and date, and message text for each video output. The program is useful when multiple CM9760-MDA units are used in one installation.

SYSTEM REQUIREMENTS

The CM9760-MDA Setup program is provided on the CM9760-MDA Resource CD. System requirements are as follows:

¥Microsoft Windows 98, 2000, NT, or XP

¥Intel486ª or Pentium¨ processor-based PC

¥16 MB or more of RAM

¥25 MB of free hard disk space

¥CD-ROM drive

22 Pelco Manual C573M-D (11/03)