SET CABLE COMPENSATION
If you choose item 2 on the Main Menu, the program displays the following menu:
| CABLE COMPENSATION |
| |||
CAM CMP CAM CMP CAM CMP |
| ||||
1 | 1 | 7 | 1 | 12 | 1 |
2 | 1 | 8 | 1 | 13 | 2 |
3 | 1 | 9 | 1 | 14 | 3 |
4 | 1 | 10 | 1 | 15 | 4 |
5 | 1 | 11 | 1 | 16 | 1 |
6 | 1 | 12 | 1 |
|
|
RETURN
Figure 11. Set Cable Compensation Menu
Transmitting video signals over long distances can adversely affect video images. However, compensation can be used to adjust for video signal degradation.
When the system displays the menu, the cursor flashes on the compensation setting for camera 1.
To change the compensation (CMP) entry, use the joystick to move to the input
To exit the menu, position the cursor on the R in RETURN and press the joystick right.
SET CAMERA DISPLAY
If you choose item 3 on the Main Menu, the program displays the following menu:
CAMERA 01 DISPLAY |
| ||
1. POSITION DISPLAY |
| ||
BRIGHTNESS: |
|
| 8 |
ENABLE TITLES: |
| ON | |
ENABLE TIME DATE: |
| ON | |
ENABLE VIDEO DISPLAY |
| ||
OUTPUT: A | B | C | D |
ON | OFF | ON | OFF |
RETURN
Figure 12. Set Camera Display Menu
This menu contains setup information for how the camera display will look. You can turn the camera display for each output on or off. You can also adjust and set the charactersÕ brightness and position. These two settings are universal for all cameras.
When the program displays this menu, the camera number on the top line flashes. Press the joystick right to select the next camera if you do not want to program output, brightness, or text position for the current camera. Use the OPEN key to select the three items to be adjusted on this menu.
18 | Pelco Manual |