Pelco cs73m-d operation manual SET Time and Date, DEC-31-02, 115952 PM

SET TIME AND DATE

If you choose item 4 on the Main Menu, the program displays the following menu:

SET TIME/DATE

DATE:	DEC-31-02
TIME:	11:59:52 PM
STYLE:	MMM-DD-YY
TYPE:	12 HOUR

SET CLOCK

Figure 13. Set Time and Date Menu

The CM9760-MDA supports four of the CM9760-CC1Õs time and date formats; and the MDAÕs format must match the CC1Õs format for correct updating of the MDA from the CC1 to occur. Table E shows how the supported formats should be matched.

Table E. CM9760-CC1/CM9760-MDA Format Matchup

CM9760-CC1	CM9760-CC1	CM9760-MDA
Format #	Format Example	Format
0	16/11/03 17:56	DD-MM-YY 24 hour
1	11/16/03 17:56	MM-DD-YY 24 hour
2	16/11/03 05:56 PM	DD-MM-YY 12 hour
3	11/16/03 05:56 PM	MM-DD-YY 12 hour

Press the joystick up/down and left/right to move through the four general selections on the menu. If you press the joystick right for any selection in the set time or date areas of this menu without first entering a number, the program keeps the existing information for the field and moves you to the next field.

The fields are defined as follows:

DATE When the program displays this menu, the cursor flashes on the month entry in this field. To change the month entry, press the OPEN or CLOSE key to pick the number of the month you want. Then press the joystick right to enter your selection. This also moves you to the next entry (day) on the line.

If you want to leave the month area without changing the month, just press the joystick right. This moves the cursor to the day area.

Select the day using the OPEN or CLOSE key. Depending on the month, the number of days will be 28, 29, 30, or 31. To enter your selection, press the joystick right.

After you enter a day, the year flashes. Use the OPEN or CLOSE key to choose a number between 0 and 99 for the year. Then press the joystick right to enter your selection.

TIME Select the hour, minute, and second in the same way you selected the month, day, and year in the previous field.

STYLE The four styles for date display are mm dd yy, dd mm yy, mmm dd yy, and dd mmm yy where mm = 2-digit month, mmm = 3-letter month abbreviation, dd = 2-digit day, and yy = 2- digit year. Use the OPEN or CLOSE key to make your selection. Then press the joystick right to enter your selection. Refer to Table E for formats compatible with the CM9760-CC1.

TYPE The time types are 12-hour and 24-hour (military time). In 12-hour mode, the program displays an AM or PM on the monitor. Use the OPEN or CLOSE key to make your selection. Then press the joystick right to enter your selection.

When you finish entering information, press the joystick down to place the cursor at RETURN on the menu. Press the joystick right to return to the Main Menu.

20 Pelco Manual C573M-D (11/03)