NOTE: If you are using a KBD200A keyboard, use the appropriate pan/tilt key (up, down, right, left) in place of moving the joystick.
MAIN MENU
PELCO MDA UNIT 01
SOFTWARE VERSION 2.05
MAIN MENU: | |
1. | CAMERA TITLE |
2. | COMPENSATION |
3. | CAMERA DISPLAY |
4. | TIME/DATE |
5. | PORTS |
6. | RESET |
7. | EXIT |
| Figure 9. Main Menu |
The fields in the Main Menu (Figure 9) are defined as follows: | |
PELCO | The first line is the title line. It contains the Unit ID as set from the MDA |
MDA UNIT | unitÕs rear panel. |
SOFTWARE | This field shows the version of software being used. |
VERSION |
|
MAIN MENU | This field instructs you to pick an item to set from the six selections |
| listed or to exit the setup program. |
A number precedes each of the seven selections. It flashes when the cursor is positioned on it. To select an item, move the keyboardÕs joystick up or down to position the cursor on the item you desire, then press the joystick to the right.
Selecting items 1 through 6 will display another menu. When you finish programming, select EXIT and press the joystick right, or exit by pressing the NEAR key.
SET CAMERA TITLE
If you choose item 1 on the Main Menu, the program displays the following menu:
CAMERA 01
CAMERA TITLE:
LOADING DOCK 4
RETURN
Figure 10. Set Camera Title Menu
Use this menu to enter a camera title. When the program displays this menu, the camera number flashes on the menuÕs top line.
¥If you want to edit the information for the camera number displayed, press the OPEN key.
¥If you want a different camera, press the joystick to the right to bring up the next camera. The title already programmed for the selected camera is displayed.
Use the joystick to access the title. Move the joystick left and right to position the cursor over a character in the title. Use the OPEN/CLOSE key to access a character. Pressing the joystick right places the cursor on the next character to program.
When you finish programming the title, press the joystick down to move the cursor to RETURN on the menu and then press the joystick to the right. This returns you to the Main Menu.
Pelco Manual | 17 |