Pioneer DEH-11E owner manual Installation, DIN front/rear mount, DIN Front-mount

Section

04Installation

Important

!Check all connections and systems before final installation.

!Do not use unauthorized parts. Use of un- authorized parts may cause malfunctions.

!Consult your dealer if installation requires dril- ling of holes or other modifications to the vehi- cle.

!Do not install this unit where :

—it may interfere with operation of the vehi- cle.

—it may cause injury to a passenger as a re- sult of a sudden stop.

!The semiconductor laser will be damaged if it overheats. Install this unit away from hot places such as near the heater outlet.

!Optimum performance is obtained when the unit is installed at an angle of less than 60°.

2Secure the mounting sleeve by using a screwdriver to bend the metal tabs (90°) into place.

Dashboard

Mounting sleeve

3 Install the unit.

Use commercially available parts when instal- ling.

Nut

60°

DIN front/rear mount

Screw

Filrewall or metal support

Metal strap

This unit can be properly installed either from “Front” (conventional DIN front-mount) or “Rear” (DIN rear-mount installation, utilizing threaded screw holes at the sides of unit chas- sis). For details, refer to the following installa- tion methods.

DIN Front-mount

Installation with metal strap and screws

1Insert the mounting sleeve into the dashboard.

When installing in a shallow space, use a sup- plied mounting sleeve. If there is enough space behind the unit, use factory supplied mounting sleeve.

Screw (M4 8)

#Make sure that the unit is installed securely in place. Unstable installation may cause this unit to malfunction, such as sound skip.

12 En