Basic Settings
English
When the shut-off time comes
The receiver turns off automatically.
To check or change the time remaining until the
1.Press SETTING, if necessary, so that the Control %/ Þ/ @ / #buttons work for setting the Sleep Timer.
2.Press Control %/ Þ, if necessary, until “SLEEP” appears on the display.
3.Press Control @/ #.
The remaining time until the
• To change the
To cancel the Sleep Timer
Press Control @ / #repeatedly in step 3 above until “0” appears on the display. (The SLEEP indicator goes off.)
Turning off the power also cancels the Sleep Timer.
Selecting the Center Speaker Size
You can register the information about the center speaker after all connections are completed.
If you do this registration first, you do not have to adjust the center speaker mode when you want to activate the surround sound.
On the front panel only:
1.Press SETTING so that the Control %/ Þ/ @ / # buttons work for selecting the center speaker size.
The lamp above the button lights up.
2.Press Control %/ Þuntil “CNTR SPK” (Center Speaker) appears on the display.
3.Press Control @ / # to select the appropriate item about your center speaker. Each time you press the button, the display changes to show the following:
SMALL
LARGE 
NO
SMALL: | Select this mode when the size of the center speaker is smaller than |
| that of the front speakers. |
|
|
LARGE: | Select this mode when the size of the center speaker is the same as |
| that of the front speakers. |
|
|
NO: | Select this mode when you do not use a center speaker. |
|
|
Note:
This “center speaker size” setting is so related to the center mode setting for surround modes (page
36)that changing this setting affects and changes the center mode to a relevant mode, and vice versa.
For example;
• If you select “SMALL,” the center mode is automatically set to “NORMAL,” and vice versa.
• If you select “LARGE,” the center mode is automatically set to “WIDE,” and vice versa.
• If you select “NO;”
– For PRO LOGIC and THEATER , the center mode is set to “PHANTOM.”
– For 3CH LOGIC, the center mode is set to “NORMAL.”
13