When an emergency broadcast (ALARM signal) is sent from an FM station:
The receiver automatically tunes in the station except in the following cases:
•When you are listening to
•When the receiver is in standby mode.
While receiving an emergency broadcast, “ALARM” appears on the display.
The TEST signal is used for equipment test — whether it can receive the ALARM signal correctly.
The TEST signal makes the receiver work in the same way as the ALARM signal does. If an TEST signal is received, the receiver automatically switches to the station broadcasting the TEST signal.
While receiving an test signal, “TEST” appears on the display.
Switching to a Broadcast Program of Your Choice Temporarily
Another convenient RDS service is called “EON (Enhanced Other Network).” The EON indicator lights up while receiving a station with the EON code.
This allows the receiver to switch temporarily to a broadcast program of your choice (NEWS, TA, and/or INFO) from a different station except in the following cases:
•When you are listening to a
•When the last received FM station is a
•When the receiver is in standby mode.
English
On the front panel only:
1.Press EON so that the last selected program type appears on the display.
The receiver enters EON standby mode*.
2.Press TA/NEWS/INFO until the program type you want appears on the display.
Each time you press the button, the display changes to show the following.
EON
TA/ NEWS /INFO
Note:
*When the receiver is in EON standby mode, the receiver is ready to receive the EON data (TA/NEWS/INFO) you select.
TA 
NEWS 
INFO 
TA/NEWS
| TA/NEWS/INFO |
| TA/INFO |
| NEWS/INFO |
|
| |
|
|
|
| |||||
TA: | Traffic Announcement in your area. | |||||||
NEWS: | News. |
|
|
|
|
|
| |
INFO: | Program the purpose of which is to impart advice in the widest | |||||||
|
| sense. |
|
|
|
|
|
|
Continued to the next page.
22