JVC RX-554RBK manual Press Test to start checking the speaker output, Balance

Activating the Surround Sounds

English

4. Press TEST to start checking the speaker output	TEST
balance.	6

“TEST” starts flashing on the display, and a test tone comes out of the speakers in the following order:

Notes:

• No test tone comes out of the

rear speakers when you have

selected “3CHLOGIC.”

Left front	Center	Right front
speaker	speaker	speaker

Rear speakers

5.If necessary, adjust the speaker output balance as follows:

•To adjust the rear speaker output level, press REAR +/–.

•To adjust the center speaker output level, press CENTER +/–.

Pressing – decreases the output level up to –10 dB. Pressing + increases the output level up to +10 dB.

–REAR +

8 9

–CENTER +

10 +10

• No test tone comes out of the

center speaker when you select

“PHANTOM” for the center

mode.

Notes:

• The sound levels of the left and
	right rear speakers will be the
	same.
•	You cannot set the sound level
	of the rear speakers when you
	have selected “3CHLOGIC.”
•	You cannot set the sound level
	of the center speaker when you
	select “PHANTOM” for the
	center mode.

6. Press TEST again to stop the test tone.	TEST
	6

If you have selected JVC Theater Surround, go to the following steps.

7. Press EFFECT to adjust the effect level.				EFFECT
Each time you press the button, the effect level changes				4
as follows:
EFFECT 1	EFFECT 2		EFFECT 3
EFFECT 5		EFFECT 4

As the number increases, the effect of the Theater

Surround mode becomes stronger.

Note:

When you have selected “PROLOGIC” or “3CHLOGIC,” you cannot select the effect level.

35