JVC RX-554RBK manual Press Control @/ # to select the center mode, Wide, Normal, Phantom, Delay

Activating the Surround Sounds

English

5.Press Control @/ # to select the center mode.

Each time you press the button, the center modes change as follows:

WIDE NORMALPHANTOM

WIDE	Select this mode when the center speaker can reproduce the bass
	better than the front speakers. All signals of the center channel are
	output through the center speaker.
NORMAL	Select this mode when the center speaker cannot reproduce the
	bass better than the front speakers. The bass portions of the center
	channel signals are output through the front speakers.
PHANTOM	Select this mode when you do not use a center speaker. The center
	speaker channel signals are output through the front speakers.

6.Press Control %/ Þ until “–DELAY +” appears on the display.

7.Press Control @/ #to adjust the delay time of the rear speaker output.

Each time you press the button, the delay time changes as follows:

DELAY 1 DELAY 2 DELAY 3

DELAY 1	Select this when the distance from you to your rear speakers is
	greater than that to the front speakers.
DELAY 2	Select this when the distance from you to your rear speakers is
	almost equal to that to the front speakers.
DELAY 3	Select this when the distance from you to your rear speakers is less
	than that to the front speakers.

8.Press Control %/ Þ until “TEST” appears on the display, then press Control @/ # to start checking the speaker output balance.

“TEST” starts flashing on the display, and a test tone comes out of the speakers in the following order:

Left front	Center	Right front
speaker	speaker	speaker

Rear speakers

Note:

When you have selected “3CHLOGIC,” you cannot select “PHANTOM.”

Note:

When you have selected “3CHLOGIC” or “THEATER,” you cannot adjust the delay time.

Notes:

•No test tone comes out of the rear speakers when you have selected “3CHLOGIC.”

•No test tone comes out of the center speaker when you select “PHANTOM” for the center mode.

33