JVC RX-554RBK manual Operating Other Components

Page 43

Operating Other Components

You can operate JVC audio and video components with this receiver’s remote control.

To operate these components with the remote control, first select a source with the source buttons on the remote control. Then, operate that source using the remote control.

English

IMPORTANT:

To operate JVC audio components using this remote control:

You need to connect JVC audio components through the COMPU LINK-3 (SYNCHRO) jacks (see page 37) in addition to the connections using cables with RCA pin plugs (see page 7).

Aim the remote control directly at the remote sensor on the receiver.

Note:

If you choose a source on the front panel, the remote control will not operate that source.

7After pressing TUNER/BAND, you can perform the following operations:

TUNER/BAND

Alternates between FM and AM (MW/LW).

1 – 10, +10

Selects a preset channel number directly.

 

For channel number 5, press 5.

 

For channel numver 15, press +10, then 5.

 

For channel number 20, press +10, then 10.

 

For channel number 30, press +10, +10

 

then 10.

RDS operating buttons

PTY SEARCH

Starts and ends searching a broadcast

 

using the RDS.

PTY SELECT +/–Selects a program type.

DISPLAY

Changes the RDS display mode.

CD TV VCR AUDIO

TAPE

DAP MODE

3D-PHONIC

SURROUND

1

2

3

TUNER/

EFFECT

DELAY

TEST

BAND

4

5

6

VCR

SEA MODE

REAR +

7/P

8

9

 

VIDEO

SEA

CENTER +

PRESET

10

+10

 

PHONO

SOUND

 

ONE TOUCH

 

CONTROL CD-DISC OPERATION

TV CH +

VCR CH +

TV VOL. +

PTY SEARCH

DISPLAY

 

 

TV/

VIDEO

PTY SELECT +

VOLUME + MUTING

RM-SR554RU REMOTE CONTROL

7After pressing CD, you can perform the following

operations on the CD player:

3

Starts playing.

4Returns to the beginning of the current (or previous) track.

¢Skips to the beginning of the next track.

7

Stops playing.

8

Pauses. To resume playing, press 3.

1 – 10, +10

Selects a track number directly.

For track number 5, press 5.

For track number 15, press +10, then 5. For track number 20, press +10, then 10.

For track number 30, press +10, +10, then 10.

7After pressing CD-DISC, you can perform the following operations on the CD changer:

1 – 6, 7/P Select the number of a disc installed in a CD changer. Then continue to operate the CD player as described above.

For example: To find a track number 11 of disc 4

1.Press CD DISC.

2.Press 4.

3.Press CD.

4.Press +10, then 1.

7After pressing TAPE, you can perform the following operations on the cassette deck:

3

Starts playback.

4Fast winds a tape from right to left.

¢Fast winds a tape from left to right.

7

Stops operation.

8

Pauses. To resume playing, press 3.

Note:

If you press SOUND CONTROL, you cannot operate the cassette deck with this remote control. If this happens, press TAPE again, so operating buttons for audio components will work for the cassette deck.

38

Image 43
Contents RX-554RBK Per I’ltalia English Deutsch Français Nederlands Español Italiano Voorzichtig -- Power en STANDBY/ON RX-554RBK Table of Contents Parts Identification Remote ControlFront Panel Handling the receiver Getting StartedGeneral LocationsFM Antenna Connections Connecting the FM and AM MW/LW AntennasUsing the Supplied FM Antenna Using the Standard Type Connector Not suppliedGetting Started Connecting the front speakersConnecting the rear and center speakers Connecting the Speakers16 ohm About the speaker impedanceIf your audio components have a Compu LINK-3 terminals Connecting Other ComponentsAudio component connections Video component connectionsTo shut off the power completely Connecting the Power CordPutting Batteries in the Remote Control On the front panel From the remote controlTurning the Power On and Off Standby Basic OperationsSelecting the Front Speakers From the remote control onlyAdjusting the Volume On the front panel onlyRecording a Source Listening with HeadphonesTo listen with only headphones Basic OperationsUsing the Sleep Timer Basic SettingsAdjusting the Front Speaker Output Balance Listening at Low Volume LoudnessSelecting the Center Speaker Size Basic SettingsWhen the shut-off time comes To cancel the Sleep TimerOne Touch Operation To store the sound settingsTo recall the sound settings To cancel the One Touch Operation functionReceiving Radio Broadcasts Tuning in Stations ManuallyUsing Preset Tuning To store the preset stationsTo tune in a preset station To cancel a stored preset stationPress 10 keys to select a preset channel number Press TUNER/BAND so that the Control %/ Þ/ @ Selecting the FM Reception ModeUsing the RDS Radio Data System to Receive FM Stations Receiving Radio BroadcastsWhat Information Can RDS Signals Provide? To continue searching after the first stop To search for a program using the PTY codesSearching for a Program by PTY Codes Press PTY Search againDisplay gives you the PTY codes described on Press PTY Search while listening to an FM stationDescriptions of the PTY codes News Switching to a Broadcast Program of Your Choice TemporarilyReceiver enters EON standby mode Traffic Announcement in your areaPress EON so that the program type TA/NEWS/INFO goes To stop listening to the program selected by EONSelecting Your Favorite SEA Mode Using the Preset SEA ModesTo cancel the preset SEA mode Press SEA Preset to select the effect level Using the Preset SEA ModesOn surround modes On JVC 3D Phonic modeOn the DAP mode Activating the Surround Sounds3DTHEATR Using JVC 3D-PHONIC ModesActivating the Surround Sounds 3DACTIONPress Effect to select the effect level Press Control @ / #to adjust the effect levelTo cancel the 3D-PHONIC mode MarkGives clear vocal and the feeling of a concert hall Using the DAP ModesPavilion HallPress Rear +/- to adjust the rear speaker output level Press Control @/ #to adjust the rear speaker output levelTo cancel the DAP mode Select OFF in step DAP indicator goes off from the displayThis case Select Prologic or Theater Select Phantom for center modeSelect 3CHLOGIC Select Normal or Wide for center mode Speaker Arrangements for Surround Modes3CHLOGIC Preparing for Surround ModesTheater PrologicNormal Press Control @/ # to select the center modeDelay WideDelay 1 Delay 2 Delay If necessary, adjust the speaker output balance as followsPress Test again to stop the test tone Press Effect to adjust the effect levelPress Test to start checking the speaker output BalanceWork for selecting the surround/DAP/3D-PHONIC Modes Using Surround ModesTo cancel surround mode From the front panelSynchronized Recording Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Receiver Automatic Source SelectionOperating Other Components To operate JVC audio components using this remote controlStandby/On section Operating Other ComponentsProblem Possible Cause Solution TroubleshootingAmplifier SpecificationsAM MW/LW tuner FM tuner IHFGeneral EN, GE, FR, NL, SP, IT