Safety Instructions, Description and Controls

Do not obstruct the ventilation of the device. Make sure, that no curtains, newspapers, furniture or any other type of object are blocking the ventilation system of the apparatus. The ventilation system must be clear of objects at all times! Overheating may lead into serious damage of the device and reduce its performance and lifespan.

Heat and warmth

Do not expose the appliance to direct sunlight. Make sure that the appliance is not subject to direct heat sources such as heaters or open fire. Make sure that the ventilation slots of the appliance are not covered.

Moisture and cleaning

This appliance is not waterproof! Do not immerse player in water. Do not allow player to come in contact with water. If water gets inside the player it may cause serious damage. Do not use cleaning agents that contain alcohol, ammoniac, benzene or abrasives as these could damage the player. For cleaning, use a soft, moistened cloth.

Professional recycling

Batteries and packaging should not be disposed of in the trash. Batteries must be handed over to a collection centre for used batteries. Separating disposable packaging materials is ecologically friendly.

SAFETY INSTRUCTIONS

1.READ INSTRUCTIONS - All the safety and operating instructions should be read before the unit is operated.

2.RETAIN INSTRUCTIONS - The safety and operating instruction should be retained for future reference.

3.HEED WARNINGS - All warnings on the unit and in the operating instructions should be adhered to.

4.FOLLOW INSTRUCTIONS - All operating instructions should be followed.

5.WATER AND MOISTURE - The unit should not be used near water, for example, near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement.

6.VENTILATION - Openings in the device serve its proper ventilation, are necessary for the operation and prevent overheating. The unit should be situated so that its location or position does not interfere with its proper ventilation. Do not place on bed, sofa, rug or similar surface that may block the ventilation openings, in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.

7.HEAT - The unit should be situated away from heat sources such as radiators, stoves, or other appliances (including amplifiers) that produce heat.

8.POWER SOURCE - The unit should be connected to power supply only of the type described in the operating instructions or as marked on the unit.

9.POWER CORD PROTECTION - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them.

10.NON-USE- During longer periods of non-use please disconnect from mains power supply and antenna.

11.OBJECT and LIQUID ENTRY - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.

12.DAMAGE REQUIRING SERVICE - The unit should be serviced by qualified service personnel when:

a.The power-supply cord or plug has been damaged.

b.Objects have fallen into, or liquid has been spilled into the unit enclosure.

c.The unit has been exposed to rain or moisture.

d.The unit does not appear to operate normally. Only use the units and controls as described in this manual.

e.The unit has been dropped, or the enclosure damaged.

f.The unit displays serious changes in its performance.

13.SERVICING - The user should not attempt to service the unit beyond that described in the user operating instructions. All other servicing should be referred to qualified service personnel.

14.CLEANING - Disconnect from mains power supply before cleaning. Do not use liquid or spray cleaners, only use a damp cloth. Follow the care and maintenance instructions in this manual.

15.LIGHTNING - During lightning and longer periods of non-use please disconnect from mains power supply and antenna.

16.SAFETY CHECK - After servicing the unit ask the customer service for a safety check.

17.OVERLOAD - To avoid fire and electric shock do not overload wall outlets and convenience receptacles.

18.ELECTROSTATIC DISCHARGE - Disconnect from mains power supply and remove batteries if unit malfunctions. Reconnect after a short time.

DESCRIPTION AND CONTROLS

1.POWER button

2.POWER LED

3.LIFT button

4.TURNTABLE

5.	45RPM insert	5			8	6
5.	45RPM insert	5			8	6
6.	TONE ARM REST & LOOK				9
6.	TONE ARM REST & LOOK				9
7.	TONE ARM WITH STYLUS					7
7.	TONE ARM WITH STYLUS					7
8.	CUE LEVER
9.	SPEED SELECTOR SWITCH	1
9.	SPEED SELECTOR SWITCH	1
10.	AC POWER CORD
11.	AUDIO OUT jacks
11.	AUDIO OUT jacks	2	4	3
		2	4	3

MAINS POWER SUPPLY

Plug the AC power cord (10) into a 230V ~ 50Hz wall outlet.

Warnings:

•Before connecting to mains power supply ensure that the data corresponds with the rating plate (230V ~ 50Hz).

•Do not touch the plug with wet hands.

•During longer periods of non-use (vacancy etc.) please disconnect from mains power supply.

•To avoid damage and the risk of fire and electric shock do not pull the cable when disconnecting from the mains power supply, always take hold of the plug.

08.		09.

2955 specifications

The Elta 2955 is an advanced airborne surveillance radar system developed by Israeli Aerospace Industries’ Elta division. Designed for both military and civilian applications, this cutting-edge radar system is enhancing air, land, and maritime situational awareness for various platforms. Emphasizing versatility, the Elta 2955 serves as a key component in modern defense strategies, extending its capabilities across multiple domains.

One of the standout features of the Elta 2955 is its ability to provide simultaneous multi-mode operations. This system employs advanced pulse-doppler technology, allowing it to detect and track a range of objects, from airborne vehicles to ground threats. Its high-resolution synthetic aperture radar (SAR) capabilities enable detailed imaging for reconnaissance missions, making it ideal for real-time intelligence gathering and target identification.

One of the key technologies incorporated into the Elta 2955 is the phased array antenna, which allows for electronic beam steering. This technology enhances the radar’s tracking capabilities and responsiveness, as operators can quickly adapt to changing scenarios without physical movement of the equipment. The radar can detect small targets in cluttered environments, even in adverse weather conditions, contributing to its overall effectiveness.

The system is designed with a modular architecture, providing flexibility in integration with various platforms, including fixed-wing aircraft, helicopters, and unmanned aerial vehicles (UAVs). This adaptability extends to software upgrades, allowing the system to evolve with emerging technologies and operational needs.

The Elta 2955 also integrates advanced signal processing algorithms to filter noise and enhance target detection, ensuring high accuracy rates. Additionally, its user-friendly interface facilitates efficient operation by military personnel, reducing the training time required for new operators.

In terms of characteristics, the Elta 2955 boasts a substantial detection range, capable of tracking multiple objects simultaneously over vast areas. This characteristic maximizes situational awareness for command and control centers, allowing for enhanced operational planning and execution.

Overall, the Elta 2955 represents a significant advancement in radar technology, offering robust capabilities for surveillance and monitoring. Its multi-platform compatibility, combined with advanced features and technologies, makes it a vital asset in contemporary defense operations, underscoring its role in ensuring national security and operational effectiveness. As military requirements continue to evolve, systems like the Elta 2955 will be integral to maintaining a strategic advantage across diverse operational landscapes.