Lucent Technologies 20 manual Select the dbit command to configure the sdsl data bit

Page 29

Configuring a 20 Series CellPipe

Configuring WAN interface

Select the cell command to enable or disable the idle-cell header.

>sdsl> cell <EnableDisable>

Select the dbit command to configure the sdsl data bit.

>sdsl> dbit <NormalReverse>

Select the default command to set the SDSL configuration back to factory setting.

>sdsl> default

Set SDSL configuration back to factory setting

Select the enable command to activate the last updated SDSL parameters.

>sdsl> <enable > (null)

Select the rate command to manually configure the SDSL line rate.

>sdsl> rate - <n*8> (144 <= (n*8) <= 2320)

Select the maxrate command to configure the maximum SDSL autobaud rate. For example:

>sdsl> maxrate

maxrate		-	configure the sdsl autobaud							max rate
can use
2320K 1568K			1552K		1536K		1168K	1152K	1040K		784K
768K	528K	416K		400K		384K	272K	208K	192K
160K	144K

Select the rate command to manually configure the SDSL line rate. For example:

>sdsl> rate
rate		- configure the sdsl line rate
can use
2320K 1568K			1552K		1536K		1168K	1152K	1040K	784K
768K	528K	416K		400K		384K	272K	208K	192K
160K	144K

Select the scramble command to enable or disable payload scrambling.

>sdsl> scramble <Enable><Disable>

Select the smbit command to configure sign and magnitude bit sequence.

CellPipe™ 20 Series User’s Guide

4-3

Image 29

Contents CellPipe 20 Series Lucent Technologies Customer Service Customer ServiceFinding information and software Obtaining technical assistanceCustomer Service Contents Upgrading System Software About this guide IntroductionWhat is the CellPipe 20 Series Product Family? What is the CellPipe 20 Series Product Family?Lucent TURN-UP Lucent TURN-UPCellPipe 20 Series management Page Verifying package contents SetupItems you need for installation Items you need for installationConnecting CellPipe 20 Series products CellPipe 20 Series rear panels Connecting CellPipe 20 Series productsChecking status lights Console setupChecking status lights Console setup Page Syntax of command-line interface Command-Line InterfaceDisplaying information about a command Using the commandsUsing the commands Viewing the main menuDisplaying second-level commands Bridging commandsSaving configurations Bridging commandsMain menu Second-level menus/description Set all configuration to factory setting Routing commands Routing commandsAdditional main-menu and second-level routing commands Command-Line Interface Command-Line Interface Page Auto-provisioning Configuring a 20 Series CellPipeConfiguring WAN interface Configuring WAN interfaceSdsl commands and configurations Select the dbit command to configure the sdsl data bit Adsl commands and configurations Select the abort command to abort the Adsl connection Multimode Configuring LAN interface Configuring LAN interfaceConfiguring LAN interface in bridging mode Configuring LAN interface in routing mode Configuring the manage command Configuring the manage commandConfiguring the mode command Quick command in bridging mode Configuring the quick commandQuick command in routing mode Configuring the quick commandConfiguring the r1483 command Configuring the r1483 commandR1483 command in bridging mode R1483 command in routing mode Configuring the dnsrelay command Configuring the dnsrelay commandConfiguring the ipoa command Configuring the pppoa command Configuring the pppoa commandConfiguring the pat command Configuring the pat commandSelect the show command to display the Pat configuration Obtaining software Preparing to upgradeUpgrading System Software Upgrading software Upgrading softwareWarranties and FCC Regulations Product warrantyOut-of warranty repair Warranty repairFCC Part 15 Notice FCC Part 15 NoticeIC CS-03 Notice IC CS-03 Notice