Lucent Technologies 20 manual Select the abort command to abort the Adsl connection

Page 31

	Configuring a 20 Series CellPipe
	Configuring WAN interface

coding	- <0><1><2><3><4><5><6><Auto> dB - coding gain
counts	- display ADSL counters
default	- reset to default ADSL setting
ec_fdm	- <Ec><Fdm> - set EC or FDM mode
rx_bin	- <start_bin> <end_bin>
show	- display ADSL parameter configuration
startup	- restart ADSL line
status	- display ADSL line status
stnl	- <T1.413><g.Lite><g.Dmt><Multi Mode>
trellis	- <Enable><Disable> - Trellis encoding
tx_pwr	- <0> .. <12> dB - Tx power attenuation
tx_bin	- <start_bin> <end_bin>

Select the abort command to abort the ADSL connection.

>adsl> abort

Abort ADSL connection

Select the bitdn command to obtain the downstream bit loading value.

>adsl> bitdn

Select the bitup command to obtain the upstream bit loading value.

>adsl> bitup

Select the coding command to set the ADSL coding gain:

>adsl> coding - <0><1><2><3><4><5><6><Auto> dB - coding

gain

Select the default command to set the ADSL configuration back to factory setting.

>adsl> default

Set ADSL configuration back to factory setting

Select the ec_fdm command to configure the ADSL link for echo cancellation or frequency division multiplexing (FDM).

>adsl> ec_fdm <Ec><Fdm>

CellPipe™ 20 Series User’s Guide

4-5

Image 31

Contents CellPipe 20 Series Lucent Technologies Obtaining technical assistance Customer ServiceCustomer Service Finding information and softwareCustomer Service Contents Upgrading System Software About this guide IntroductionWhat is the CellPipe 20 Series Product Family? What is the CellPipe 20 Series Product Family?CellPipe 20 Series management Lucent TURN-UPLucent TURN-UP Page Verifying package contents SetupConnecting CellPipe 20 Series products Items you need for installationItems you need for installation CellPipe 20 Series rear panels Connecting CellPipe 20 Series productsChecking status lights Console setupChecking status lights Console setup Page Syntax of command-line interface Command-Line InterfaceViewing the main menu Using the commandsDisplaying information about a command Using the commandsBridging commands Bridging commandsDisplaying second-level commands Saving configurationsMain menu Second-level menus/description Set all configuration to factory setting Routing commands Routing commandsAdditional main-menu and second-level routing commands Command-Line Interface Command-Line Interface Page Auto-provisioning Configuring a 20 Series CellPipeSdsl commands and configurations Configuring WAN interfaceConfiguring WAN interface Select the dbit command to configure the sdsl data bit Adsl commands and configurations Select the abort command to abort the Adsl connection Multimode Configuring LAN interface in bridging mode Configuring LAN interfaceConfiguring LAN interface Configuring LAN interface in routing mode Configuring the mode command Configuring the manage commandConfiguring the manage command Configuring the quick command Configuring the quick commandQuick command in bridging mode Quick command in routing modeR1483 command in bridging mode Configuring the r1483 commandConfiguring the r1483 command R1483 command in routing mode Configuring the ipoa command Configuring the dnsrelay commandConfiguring the dnsrelay command Configuring the pppoa command Configuring the pppoa commandConfiguring the pat command Configuring the pat commandSelect the show command to display the Pat configuration Upgrading System Software Preparing to upgradeObtaining software Upgrading software Upgrading softwareWarranties and FCC Regulations Product warrantyFCC Part 15 Notice Warranty repairOut-of warranty repair FCC Part 15 NoticeIC CS-03 Notice IC CS-03 Notice