Lucent Technologies 20 manual R1483 command in routing mode

Configuring a 20 Series CellPipe

Configuring the r1483 command

setspan	-	<Enable><Disable> spanning tree
show	-	show RFC1483 configuration

Select the delpvc command to delete one or all PVCs.

>r1483> delpvc <all>[<vpi>/]<vci>

Select the pfilter command to set the packet filter type.

>r1483> pfilter [<vpi>/]<vci> <anyippppoeigmpnone>

Select the setpvc command to set the PVCs in bridging mode.

>r1483> setpvc [<vpi>/]<vci> [llc/vcmux]

Select the setqos command to set the class for quality of service.

>r1483> setqos [<vpi>/]<vci> <ubrcbrvbr(nrt)>

Select the show command to display the RFC1483 configuration.

FUNCTION	VPI/VCI	CLASS	LLC/VCMUX	Spanning	Pkt Filter
Rfc1483	8/35	ubr	LLC	Enable	ANY

The r1483 command in routing mode

The following is a list of menus under the r1483 command in the routing mode:

delwanip	- delete VPI and VCI
setqos	- set class
setrip	- set RIP		configuration
setwanip	-	set PVC	and Wan IP for routing mode
show	-	show RFC1483 configuration

Select the delwanip command to delete one or all PVCs.

>r1483> delpvc <all>[<vpi>/]<vci>

Select the setqos command to set the class for quality of service.

>r1483> setqos [<vpi>/]<vci> <ubrcbrvbr(nrt)>

Select the setrip command to set the PVC for RIP.

>ipoa> setrip [<vpi>/]<vci> <121&20>

4-12 CellPipe™ 20 Series User’s Guide