Lucent Technologies 20 manual Configuring WAN interface, Sdsl commands and configurations

Page 28

Configuring a 20 Series CellPipe

Configuring WAN interface

When you power up the unit, it is set to default (factory settings) and the console will display the following message:

Starting to download from remote server...

This means TURN-UP is enabled and is downloading the latest configuration information.

To disable the feature, interrupt the download and manually configure the system.

To re-enable the feature, you need to select the default command and reinstall the factory default configuration.

Configuring WAN interface

Currently the 20 Series units support SDSL and ADSL WAN interfaces.

SDSL commands and configurations

The following is a list of the menus available under the sdsl command:

auto - <Enable><Fast><Scan><Disable> autobaud rate function cell - <Enable><Disable> idle-cell header

dbit - configure the SDSL data bit as normal or reverse polarity default - set SDSL configuration back to factory setting enable - activate the last updated SDSL parameters

maxrate - configure the SDSL autobuad max rate rate - manually configure the SDSL line rate scramble - <Enable><Disable> payload scrambling smbit - configure sign/magnitude bit sequence

status - display the configuration and status of current SDSL setting

terminal - configure modem to COE or CPE mode

Select the auto command to set values for autobaud rate function.

>sdsl> auto <Enable><Fast><Scan><Disable>

(Scan Rate: 2320, 1744, 1536, 1152, 768, 384, 192)

4-2	CellPipe™ 20 Series User’s Guide

Image 28

Contents CellPipe 20 Series Lucent Technologies Customer Service Customer ServiceFinding information and software Obtaining technical assistanceCustomer Service Contents Upgrading System Software Introduction About this guideWhat is the CellPipe 20 Series Product Family? What is the CellPipe 20 Series Product Family?CellPipe 20 Series management Lucent TURN-UPLucent TURN-UP Page Setup Verifying package contentsConnecting CellPipe 20 Series products Items you need for installationItems you need for installation Connecting CellPipe 20 Series products CellPipe 20 Series rear panelsChecking status lights Console setupChecking status lights Console setup Page Command-Line Interface Syntax of command-line interfaceUsing the commands Displaying information about a commandUsing the commands Viewing the main menuBridging commands Displaying second-level commandsSaving configurations Bridging commandsMain menu Second-level menus/description Set all configuration to factory setting Routing commands Routing commandsAdditional main-menu and second-level routing commands Command-Line Interface Command-Line Interface Page Configuring a 20 Series CellPipe Auto-provisioningSdsl commands and configurations Configuring WAN interfaceConfiguring WAN interface Select the dbit command to configure the sdsl data bit Adsl commands and configurations Select the abort command to abort the Adsl connection Multimode Configuring LAN interface in bridging mode Configuring LAN interfaceConfiguring LAN interface Configuring LAN interface in routing mode Configuring the mode command Configuring the manage commandConfiguring the manage command Configuring the quick command Quick command in bridging modeQuick command in routing mode Configuring the quick commandR1483 command in bridging mode Configuring the r1483 commandConfiguring the r1483 command R1483 command in routing mode Configuring the ipoa command Configuring the dnsrelay commandConfiguring the dnsrelay command Configuring the pppoa command Configuring the pppoa commandConfiguring the pat command Configuring the pat commandSelect the show command to display the Pat configuration Upgrading System Software Preparing to upgradeObtaining software Upgrading software Upgrading softwareProduct warranty Warranties and FCC RegulationsWarranty repair Out-of warranty repairFCC Part 15 Notice FCC Part 15 NoticeIC CS-03 Notice IC CS-03 Notice