Lucent Technologies 20 manual Configuring LAN interface in routing mode

Page 34

Configuring a 20 Series CellPipe

Configuring LAN interface

fullduplex	- fullduplex <Disable><Enable>
setip	-	setup the IP address, and subnet mask for
		Ethernet connection
show	-	show LAN configuration

Select the fullduplex command to enable or disable fullduplex.

>lan> fullduplex <Disable><Enable>

Select the setip command to set up the IP address and subnet mask for the LAN link. For example:

>lan> setip 192.168.2.32

Set a new IP address = 192.168.2.32 and

Subnet mask is default = 255.255.255.0

Select the show command to display the current configuration of IP setting. For example:

>lan> show

Ethernet IP = 192.168.2.32 and

Subnet mask is default = 255.255.255.0

FullDuplex : Disable

Configuring LAN interface in routing mode

The following is a list of the menus available under the lan command in routing mode:

dhcpclient	- set dhcp client configuration
dhcpserver	- set dhcp server configuration
fullduplex	- fullduplex <Disable><Enable>
setdhcp	- set dhcp operation
setip	- setup the IP address, and subnet mask for
	Ethernet connection
show	- show LAN configuration

Select the dhcpclient command to set up the dhcp client configuration.

>lan> dhcpclient <lease time>

4-8	CellPipe™ 20 Series User’s Guide

Image 34

Contents CellPipe 20 Series Lucent Technologies Finding information and software Customer ServiceCustomer Service Obtaining technical assistanceCustomer Service Contents Upgrading System Software Introduction About this guideWhat is the CellPipe 20 Series Product Family? What is the CellPipe 20 Series Product Family?CellPipe 20 Series management Lucent TURN-UPLucent TURN-UP Page Setup Verifying package contentsConnecting CellPipe 20 Series products Items you need for installationItems you need for installation Connecting CellPipe 20 Series products CellPipe 20 Series rear panelsChecking status lights Console setupChecking status lights Console setup Page Command-Line Interface Syntax of command-line interfaceUsing the commands Using the commandsDisplaying information about a command Viewing the main menuSaving configurations Bridging commandsDisplaying second-level commands Bridging commandsMain menu Second-level menus/description Set all configuration to factory setting Routing commands Routing commandsAdditional main-menu and second-level routing commands Command-Line Interface Command-Line Interface Page Configuring a 20 Series CellPipe Auto-provisioningSdsl commands and configurations Configuring WAN interfaceConfiguring WAN interface Select the dbit command to configure the sdsl data bit Adsl commands and configurations Select the abort command to abort the Adsl connection Multimode Configuring LAN interface in bridging mode Configuring LAN interfaceConfiguring LAN interface Configuring LAN interface in routing mode Configuring the mode command Configuring the manage commandConfiguring the manage command Quick command in routing mode Configuring the quick commandQuick command in bridging mode Configuring the quick commandR1483 command in bridging mode Configuring the r1483 commandConfiguring the r1483 command R1483 command in routing mode Configuring the ipoa command Configuring the dnsrelay commandConfiguring the dnsrelay command Configuring the pppoa command Configuring the pppoa commandConfiguring the pat command Configuring the pat commandSelect the show command to display the Pat configuration Upgrading System Software Preparing to upgradeObtaining software Upgrading software Upgrading softwareProduct warranty Warranties and FCC RegulationsFCC Part 15 Notice Warranty repairOut-of warranty repair FCC Part 15 NoticeIC CS-03 Notice IC CS-03 Notice