Lucent Technologies 20 manual Configuring the r1483 command, R1483 command in bridging mode

Page 37

Configuring a 20 Series CellPipe

Configuring the r1483 command

>>quick

R1483(r)/ IPoA(i)/ PPPoA(p): ipoa

0 PVC existed, 8 PVCs available.

Ethernet IP (149.198.65.46) :

Subnet mask (255.255.255.0) :

VPI(0-1023): 5

VCI(1-65535): 33

WAN IP : 148.198.6.46

Gateway : 148.198.6.90

>>quick

R1483(r)/ IPoA(i)/ PPPoA(p): pppoa

0 PVC existed, 1 PVC available.

Ethernet IP (149.198.65.46) :

Subnet mask (255.255.255.0) :

VPI(0-1023): 5

VCI(1-65535): 34

Authentication( PAP(p)/CHAP(c)/None(n) ): p

User name: Lucent

Password: *******

Retype password: *******

Configuring the r1483 command

You can configure the r1483 command for either bridging or routing mode.

The r1483 command in bridging mode

The following is a list of menus under the r1483 command in the bridging mode:

delpvc	- delete VPI		and VCI
pfilter	- set packet		filter type
setpvc	-	set VPI and VCI for bridge mode
setqos	-	set class

CellPipe™ 20 Series User’s Guide

4-11

Image 37

Contents CellPipe 20 Series Lucent Technologies Customer Service Customer ServiceFinding information and software Obtaining technical assistanceCustomer Service Contents Upgrading System Software About this guide IntroductionWhat is the CellPipe 20 Series Product Family? What is the CellPipe 20 Series Product Family?CellPipe 20 Series management Lucent TURN-UPLucent TURN-UP Page Verifying package contents SetupConnecting CellPipe 20 Series products Items you need for installationItems you need for installation CellPipe 20 Series rear panels Connecting CellPipe 20 Series productsChecking status lights Console setupChecking status lights Console setup Page Syntax of command-line interface Command-Line InterfaceDisplaying information about a command Using the commandsUsing the commands Viewing the main menuDisplaying second-level commands Bridging commandsSaving configurations Bridging commandsMain menu Second-level menus/description Set all configuration to factory setting Routing commands Routing commandsAdditional main-menu and second-level routing commands Command-Line Interface Command-Line Interface Page Auto-provisioning Configuring a 20 Series CellPipeSdsl commands and configurations Configuring WAN interfaceConfiguring WAN interface Select the dbit command to configure the sdsl data bit Adsl commands and configurations Select the abort command to abort the Adsl connection Multimode Configuring LAN interface in bridging mode Configuring LAN interfaceConfiguring LAN interface Configuring LAN interface in routing mode Configuring the mode command Configuring the manage commandConfiguring the manage command Quick command in bridging mode Configuring the quick commandQuick command in routing mode Configuring the quick commandR1483 command in bridging mode Configuring the r1483 commandConfiguring the r1483 command R1483 command in routing mode Configuring the ipoa command Configuring the dnsrelay commandConfiguring the dnsrelay command Configuring the pppoa command Configuring the pppoa commandConfiguring the pat command Configuring the pat commandSelect the show command to display the Pat configuration Upgrading System Software Preparing to upgradeObtaining software Upgrading software Upgrading softwareWarranties and FCC Regulations Product warrantyOut-of warranty repair Warranty repairFCC Part 15 Notice FCC Part 15 NoticeIC CS-03 Notice IC CS-03 Notice