Configuring a 20 Series CellPipe
Configuring the pat command
Confirm Password again: ******
Pass has been changed
Select the deluser command to delete a user of a pppoa connection.
>pppoa> deluser
Select the echo command to input the echo time interval and enable LCP echo cancellation.
>pppoa> echo <interval time>
Select the setllc command to enable or disable logic link control (LLC).
>pppoa> setllc <e>nable<d>isable
Select the setqos command to set the class for quality of service.
>pppoa> setqos [<vpi>/]<vci> <ubrcbr>
Select the setrip command to set up for RIP.
>pppoa> setrip <121&20>
Select the show command to display the PPPoA routing setting.
>pppoa> show |
|
|
| |
PPPoA dial out setting: |
|
| ||
Function | VPI/VCI | Class | PCR (Kbits) | UserID/Auth |
PPPoA | 2/32 | ubr | 640 | Lucent/CHAP |
LLC = Disable | Echo interval time: 60 s | |||
Configuring the pat command
The following is a list of the menus available under the pat command:
addpatin | - add incoming PAT table | ||
delpatin | - delete | incoming PAT table | |
setpat | - | enable | or disable PAT function |
show | - | show PAT configuration | |
CellPipe™ 20 Series User’s Guide |