
SpectraLink 8002 Wireless Telephone Overview
Quick Start Guide
1.A wireless LAN must be properly configured and operational through the use of 802.11 wireless APs. Ensure WMM is enabled on the APs.
2.Configure a TFTP server on the LAN. The TFTP server is used to load the handset software and SIP configuration files into the handsets. See Chapter 2 SpectraLink 8002 Wireless Telephone Configuration for DHCP information.
3.The supported SIP system components must be connected to your network and completely operational.
4.Visit http://www.polycom.com/usa.en/support/voice/wi- fi/spectralink_8002_wireless.html to download the latest handset software and example SIP configuration files.
5.Ensure the handset software is properly loaded on the TFTP server that has been designated for the handset code. See Chapter 3 Software License and Protocol Management, section Configuration Process.
6.Create/modify configuration files on the SIP TFTP server to define parameters for the SIP application. See Chapter 4 Programming the SIP Handset Features, section SIP TFTP Server Configuration Files. The TFTP server may be the same one referenced in step 2 above.
7.Configure your handset per Chapter 2 SpectraLink 8002 Wireless Telephone Configuration. Ensure these configuration options are set:
Set License Option to 22.
a With the handset powered off, press and hold the Power Off key. While holding the Power Off key, press and release the
Power On key.
b Select Phone Config option. Press OK softkey. c Select License Option. Press OK softkey.
d Select Set Current. Press OK softkey. e Select Type 022. Press OK softkey.
PN: | 13 |