SpectraLink 8002 Wireless Telephones Configuration and Administration (SIP)
Numbers scrolling across the handset display indicate AP information is being obtained. A Waiting message indicates the system is not configured properly and the handset cannot find any APs.
Solving coverage issues
Coverage issues are best resolved by adding and/or relocating APs.
Overlap issues may be resolved by reassigning channels to the APs or by relocating the APs. See Chapter 10 Troubleshooting under Access Point Problems for more information.
Diagnostics Mode
The Diagnostics Mode is used to evaluate the overall quality of the link between the handset, AP, and infrastructure side equipment, such as proxy server. Unlike site survey, the Diagnostics Mode is used while the functional code is running, and during a call.
When Diagnostics Mode is turned on in the Admin menu, the handset can display diagnostic screens any time it is active (in a call).
Start the display of diagnostic information by pressing the MENU key. Pressing the MENU key multiple times will cycle through the various screens and the normal
Note that the normal use of the MENU key is not available if Diagnostics Mode is enabled.
76 | PN: |