Polycom 8002 manual Using the SIP Handset

			Using the SIP Handset
Softkey	Name	Displayed…	Press to…
Fwd	Forward Definition	Prior to entering the first	Delete a previously defined
		character of a dial number.	forward destination.
			Or initiate definition of a new
			forward destination.
Hold	Hold	In an active call.	Place the call on hold. The line
			status shows x when the call is
			on hold or * when audio is
			flowing.
Msg	Message	Initial dial screen when new	Initiate a call to the specified
		line is selected and a dial	message center contact address
		tone is active prior to	for retrieval or administration of
		entering first character of the	voicemail.
		number to be dialed3.
Mute	Toggle muting	When in an active call.	Toggle audio transmission to the
			far end. The line status shows *
			when not muted or x when
			muted.
OK	OK	Power up registration if	Send the username and
		username is not configured	password to the SIP server for
		in admin menu.	authorization to register the
			handset.
Redl	Redial	Prior to entering the first	Redial the last number that was
		character of a dial number.	dialed.
Rej	Reject	Incoming call on the selected	Reject the incoming call. The SIP
		line.	server will then redirect the call
			elsewhere if configured to do so.
Rsme	Resume	In an active call and you	Resume a call that was
		have placed the call on hold	previously placed on hold or that
		or in standby mode if any call	went on hold when another line
		is on hold.	was activated.
Save	Save	Entering a dial number as a	Save the dial number as the
		forward destination.	forwarding destination for the
			selected line.

3 Appears only if the PROXYn_MAIL_NOTIFY is configured. A message center contact address must be defined for the proxy used

by the selected line.

PN: 1725-36034-001_C.doc 61