Polycom 8002 manual Using the SIP Handset

		Using the SIP Handset
If you want to…	Then…
Listen to voicemail	When any proxy has outstanding messages, the voicemail icon will display.
	The LINE menu will display a plus (+) indication when there is a new
	voicemail for that line. Indications are cleared when the handset receives
	notification that all new voicemail messages have been read.
	1	Press START and dial the number assigned to message retrieval and
		press START again.
	2	Follow system instructions to retrieve messages.
	Alternately, if a PROXYn_MAIL_ACCESS value has been configured for the
	corresponding proxy, the voicemail system can also be accessed by
	pressing the Msg softkey, which will appear after selecting a line and before
	beginning to dial.
Do Not Disturb	Press FCN 2. The handset will not ring for new incoming calls.
(reject all incoming calls)	When the do-not-disturb feature is enabled, the standby screen will display
	Do Not Disturb.
Clear Do Not Disturb	Press FCN 2 again to resume ringing for new incoming calls.
Redial the last number	1	Press START.
you dialed	2	Press Redl.
	3	Verify that the displayed number is the one you want and the line # is
		valid.
	4	Press START.
Activate a registered OAI	1	Press START.
function on an OAI	2	Press FCN.
server
	3	Navigate to desired OAI function using Up and Down buttons.
	4	Select the OAI function using the Select button or shortcut key.
Silence while ringing	Press the END key to silence the ring.
Adjust the	While the headset is plugged in, press the up/down volume buttons on the
headset volume	side of the handset during the call.
End the call	Press the END key to return to the standby mode.
Turn on the backlight	The backlight comes on when any key is pressed or when there is an
	incoming call, and stays on for 10 seconds. It turns off if another key is not
	pressed for 10 seconds.

PN: 1725-36034-001_C.doc 69